Sharp XG-NV51XE Скачать руководство пользователя страница 40

Страница: 40 / 55

Maintenance &

oubleshooting

Air Filter Maintenance

• This projector is equipped with three air filters to ensure the optimal operating condition of the projector.
• The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used

in a dusty or smoky location.

• Have your nearest Sharp Authorised LCD Projector Dealer or Service Centre exchange the filter (PFILD0076CEZZ)

when it is no longer possible to clean it.

Air filter

Clean the air filter.

Replace the air filter.

Turn off the main
power.

Remove the bottom
filter cover.

Grasp the air filter between your
fingers and lift it out of the filter
cover.

Turn over the projector. Press the
tab and lift open the filter cover
in the direction of the arrow.

Remove the air filter.

Replace the filter
cover.

Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.

Place the air filter underneath
the tabs on the filter frame.

Clean the dust off the air filter
and cover with a vacuum
cleaner extension hose.

Turn off the

MAIN POWER

switch. Then unplug the power
cord.

Tab

Cleaning and replacing the bottom air filter

Bottom View

• Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.

Cleaning the side and bottom air filters (not removable)

If dust or dirt has collected inside the air filters, clean the filters with a vacuum cleaner extension hose.

• The side and bottom air filters cannot be removed.

Side and Rear View

Air filter (not removable)

Содержание XG-NV51XE
























































Результаты поиска

Содержание XG-NV51XE

Отзывы:

Похожие инструкции для XG-NV51XE

Бренды по названию

Популярные бренды

Sharp XG-NV51XE, Руководство по эксплуатации

Результаты поиска

Содержание XG-NV51XE

Отзывы:

Похожие инструкции для XG-NV51XE

Бренды по названию

Популярные бренды