E-9
Setting Up the Projector
Using the Focus and Zoom
• Zoom, Focus and Reversed/Inverted Image mode functions broaden your options for projector placement.
• See pages 10, 11 and 12 for details on projector setup.
SIDE VIEW
1. Turn on the MAIN POWER.
Turn on the MAIN POWER switch on the back of the
projector.
2. Turn on the POWER.
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control to turn on the
power.
Table setting
Zoom
3. Rotating the zoom ring (from the
housed position to the wide angle
position)
Rotate the zoom ring on the lens until it clicks. The pic-
ture can be adjusted within the zoom range.
4. Adjusting the focus
Rotate the lens focusing ring until the image on the
screen is in focus.
5. Adjusting the zoom
Rotate the zoom ring. The picture can be adjusted to the
desired size within the zoom range.
Zoom
Ceiling setting
Invert Image
3
→
(Wide angle)
Zoom ring
(Lens housed)
(Minimum picture size)
(Zoom)
↔
5
Zoom ring
(Maximum picture size)
Lens focusing ring
4
2
P O W E R
L A M P
T E M P .
POWER indicator
