background image

7

XG-MB65X

WARNING:

High brightness light source,  do not stare into the beam of light,  or view directly.  Be especially
careful that children do not stare directly in to the beam of light.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  DO NOT EXPOSE THIS UNIT TO
MOISTURE OR WET LOCATIONS.

CAUTION:   TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE CABINET.

NO USER-SERVICEABLE PARTS  EXCEPT LAMP UNIT.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lighting flash with arrowhead within a
triangle is intended to tell the user that
parts inside the product are risk of electric
shock to persons.

The exclamation point within a triangle is
intended to tell the user that important
operating and servicing instructions are in
the manual with the projector.

CAUTION

AVERTISSEMENT: Source lumineuse de grande intensité.  Ne pas fixer le faisceau lumineux ou le regarder

directement.  Veiller particulièrement à éviter que les enfants ne fixent directement le
faisceau lumineux.

AVERTISSEMENT: AFIN D’EVITER TOUT RISQUE D’INCENDIE OU D’ELECTROCUTION,  NE PAS PLACER

CET APPAREIL DANS UN ENDROIT HUMIDE OU MOUILLE.

L’éclair terminé d’une flèche à l’intérieur
d’un triangle indique à l’utilisateur que les
pi‘eces se trouvant dans l’appareil sont
susceptibles de provoquer une décharge
électrique.

Le point d’exclamation à l’intérieur d’un
triangle indique à l’utilisateur que les
instructions de fonctionnement et
d’entretien sont détaillées dans les
documents fournis avec le projecteur.

RISQUE

D’ÉLECTROCUTION. NE
PASR ETIRER LES VIS Á

 L’EXCEPTION DE LA VIS DE

REPARATION UTILISATEUR

SPECIFIEES

ATTENTION

ATTENTION:  POUR EVITER TOUT RISQUE

D’ELECTROCUTION,  NE PAS RETIRER LE CAPOT.

AUCUNE DES PIECES INTERIEURES N’EST REPARABLE

PAR L’UTILISATEUR, A L’EXCEPTION DE L’UNITE DE

LAMPE.  POUR TOUTE REPARATION,  S’ADRESSER A UN

TECHNICIEN D’ENTRETIEN QUALIFIE.

RISK OF ELECTRIC SHOCK.

DO NOT REMOVE SCREWS

EXCEPT SPECIFIED USER

SERVICE SCREW.

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212

CAUTION

(POWER Unit)

For continued
protection against a
risk of fire,  replace
only with same type
6.3A, AC250V fuse.
(F701)

PRECAUTION

(Unité de PUTSSANCE)

Pour une protection
continue contre un
risques d’incendie,  ne
remplacer qu’avec un
fusible 6.3A, AC250V
 du même type.
(F701)

6.3A 250V

6.3A 250V

Содержание XG-MB65X





























Отзывы: