Sharp XG-C55X - Conference Series XGA LCD Projector, Руководство по обслуживанию

Страница: 2 / 162

2
XG-C55X
Specifications
LCD Projector
XG-C55X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480
I
/DTV480P/DTV540P/DTV580
I
/DTV580P/DTV720P/DTV1035
I
/DTV1080
I
LCD panel
×
3, RGB optical shutter method
Panel size: 0.99" (25.1 mm) (15 [H]
×
20 [W] mm)
No. of dots: 786,432 dots (1,024 [H]
×
768 [V])
1—1.27
×
zoom lens, F1.7—2.2, f = 36.5—46.3 mm
SHP 300 W
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
750 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0—0.7 Vp-p, positive, 75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
9-pin mini DIN connector
12—230 MHz
43—200 Hz*
15—126 kHz
φ
3.5 mm minijack: AUDIO, 0.5 Vrms, more than 47 k
Ω
(stereo)
3.0 W (monaural)
4 cm
×
7 cm
AC 100–240 V
4.0 A
50/60 Hz
400 W (Standard mode)/325 W (Low power mode) with AC 100 V
380 W (Standard mode)/310 W (Low power mode) with AC 240 V
0.5 W (AC 100 V) – 0.8 W (AC 240 V) (When “Mntr.out/RS232” is set to “OFF”)
1,505 BTU/hour (Standard mode)/1,220 BTU/hour (Low power mode) with AC 100 V
1,430 BTU/hour (Standard mode)/1,165 BTU/hour (Low power mode) with AC 240 V
41°F to 104°F (+5°C to +40°C)
-4 °F to 140°F (-20 °C to +60°C)
Plastic
38 kHz
15
3
⁄
8
"
×
3
7
⁄
8
"
×
11
9
⁄
16
" (390 (W)
×
99 (H)
×
294 (D) mm) (main body only)
15 1 ⁄
2
"
×
4 7 ⁄
16
"
×
11 5 ⁄
8
" (393 (W)
×
114 (H)
×
303 (D) mm) (including adjustment foot
and projecting parts)
11.3 lbs. (5.1 kg)
Remote control, Two R-6 batteries, Power cord for U.S., Canada etc. (11'10", 3.6 m), Power cord for
Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6', 1.8 m), Power
cord for Australia, New Zealand and Oceania (6', 1.8 m), RGB cable (9'10", 3 m), USB cable (3'3",
1 m), DIN-D-sub RS-232C adaptor (5
57
⁄
64
", 15 cm), Remote receiver, Extra air filter, Lens cap (at-
tached), Projector manual and technical reference CD-ROM, Sharp Advanced Presentation Soft-
ware CD-ROM, Sharp Advanced Presentation Software quick installation guide, Quick guide label,
Operation manual
Lamp unit (Lamp/cage module) (BQC-XGC55X//1), Remote control (RRMCGA176WJSA), Two R-6
batteries (“AA” size, UM/SUM-3, HP-7, or similar), Power cord for U.S., Canada etc.
(QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K.,
Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia, New Zealand and Oceania
(QACCLA014WJPZ), RGB cable (QCNWGA012WJPZ), USB cable (QCNWG0007CEPZ), DIN-D-
sub RS-232C adaptor (QCNWGA015WJPZ), Remote receiver (RUNTKA061WJZZ), Air filter
(PFILDA005WJZZ), Lens cap (PCAPHA003WJSA), Projector manual and technical reference CD-
ROM (UDSKAA035WJZZ), Sharp Advanced Presentation Software CD-ROM (UDSKAA036WJZZ),
Sharp Advanced Presentation Software quick installation guide (TINS-A867WJZZ), Quick guide la-
bel (TLABZA364WJZZ), Operation manual (TINS-A812WJZZ)
Product type
Model
Video system
Display method
LCD panel
Standard lens
Projection lamp
Component input signal
(INPUT1/2)
Horizontal resolution
Computer RGB input signal
(INPUT 1/2)
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Computer control signal (RS-232C)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
As a part of policy of continuous improvement, SHARP reserves the right to make design and speci-
fication changes for product improvement without prior notice. The performance specification figures
indicated are nominal values of production units. There may be some deviations from these values in
individual units.