XE-A301V
OPTIONS
– 4 –
CHAPTER 2. OPTIONS
1. OPTIONS (NO)
2. SERVICE OPTIONS (NO)
3. SUPPLIES
4. SPECIAL SERVICE TOOLS
CHAPTER 3. MASTER RESET AND PROGRAM RESET
1. MASTER RESETTING
Master resetting clears the entire memory and resumes initial values.
Master resetting can be accomplished by using the following procedure:
The master reset can also be accomplished in the following case.
In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically performed
after the power has been plugined the AC cord to the wall outlet.
(This is because if power failure occurs with no battery attached to
the machine, all the memories are lost and the machine does not
work properly after power recovery; this requires the master reset
operation.)
2. PROGRAM RESETTING (INITIALIZATION)
This resetting resumes the initial program without clearing memory.
This resetting can be operated at below sequence in PGM mode.
Note: In case power failure occurs when the machine has no battery
attached to it, the master reset operation is automatically per-
formed after the power has been restored.
NO
NAME
PARTS CODE
PRICE
RANK
DESCRIPTION
1
Thermal roll paper
TPAPR6645RC05
BA
5 ROLLS/PACK
NO
NAME
PARTS CODE
PRICE
RANK
DESCRIPTION
1
RS-232 Loop-back connector
UKOG-6705RCZZ
BU
Procedure A: 1) Unplug the AC cord from the wall outlet.
2) Set the mode switch to the PGM position.
3) While holding down both the JOURNAL FEED key
and [CL] key, plugin the AC cord to the wall outlet.
Procedure: 1) Unplug the AC cord from the wall outlet.
2) Set the mode switch to the PGM position.
3) While holding down both JOURNAL FEED key, plugin
the AC cord to the wall outlet.
