Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo Creation, Руководство по обслуживанию

Страница: 16 / 31

XE-A203U/XE-A203A TEST FUNCTION
– 14 –
12) AD CONVERSION PORT TEST
1
Key operation
2
Test procedure
The AD value of each AD conversion port is sequentially displayed
for every 1 sec.
3
Display
4
End of testing
When any key is pressed, the test is terminated and the AD value at
the terminating point is printed.
13) WINDING SPOOL CHECK TEST
1
Key operation
2
Test procedure
The winding spool motor is rotated for 2 sec.
3
Display
4 End of testing
The test will automatically be terminated and the printer prints as
follows.
14) USB COMMUNICATION TEST (ID/ADDRESS PRINT)
1
Key operation
2
Test procedure
The USB revision, the vendor ID, the product ID, and the device
address assigned by the host are printed.
3 Display
4
End of the test
The test will automatically be terminated and the printer prints as
follows.
15) SLEEP MODE TEST
1 Key operation
2
Test procedure
Check to confirm that the machine has entered the sleep mode
(display OFF, Dp ON), and wait for a change in status (key input,
change in RS port).
3 Display
4
End of the test
The test will automatically be terminated and the printer prints as
follows.
16) SD CARD TEST (SD CARD INFORMATION)
1
Key operation
2
Test procedure
The SD card is detected and the write protect status is displayed.
After completion of the test, the SD card register value is printed.
Error print list
3
Display
4
End of the test
When any key is pressed, the SD card register is read and the end
print is made.
RCPT/PO 1 6 0
( * ) X = 1: Head temperature X = 2: Head voltage X = 3: Battery voltage
( * ) * * * * = A /D value
OP display:
POPUP display:
1 6 0 X * * * *
End print:
160
HEAD TEMP
HEAD VOLTAGE
BATTERY VOLTAGE
***
***
***
RCPT/PO 1 7 3
OP display:
POPUP display:
1 7 3 .
173
End print:
RCPT/PO 5 2 0
OP display:
POPUP display:
5 2 0
520
print:
USB Rev. Ver. XXX
VENDOR ID XXX
PRODUCT ID XXX
DEVICE ADDRESS XXX
Error print Error content
SD CARD NO DETECT SD Card not detected
SD READ ERROR SD read error
RCPT/PO 5 5 0
OP display:
POPUP display:
.
550
End print:
RCPT/PO 6 2 0
OP display:
POPUP display:
6 2 0 X - Y
X - Y
( * ) X = SD card detection
( * ) Y = WP detection
1 SD card YES
1 Write Protect state
0 : SD card NO
0 : Write Protect NO
When the
test ends normally:
When an error occurs:
620
XXXXXXXXXXXXXXXX--
XXXXXXXXXXXXXXXXh
XXXXXXXXXXXXXXXX--
XXXXXXXXXXXXXXXXh
12345678h
******
620
( * ) ****** = Error print (Refer to the error print.)
CID
CSD
OCR