manualshive.com logo in svg

Sharp X-70H, Руководство по эксплуатации

Поделиться
Скачать
Sharp X-70H Скачать руководство пользователя страница 9

8

PREPARATION FOR USE

Connect each speaker wire to the SPEAKER termi-
nals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.

Notes:

●

Connect the wire with the white line to the minus
(-) terminal and the plain wire to the plus (+) ter-
minal.

●

Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.

●

Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.

●

Do not allow any objects to fall into or to be placed
in the bass reflex ducts.

●

Unplug the AC power lead from the AC socket
before connecting or disconnecting any com-
ponent.

■

Speaker connection

2

1

3

Right speaker

Left speaker

White
line

■

Removing the speaker grilles

1

Remove the lower part of the speaker grille first.

2

Remove the upper part of the speaker grille.

Caution:
When the speaker grilles are removed, the speaker
diaphragms are exposed. Make sure nothing comes
into contact with the speaker diaphragms.

■

Mounting the speaker grilles

Fit the four posts on the speaker grille into the
mounting holes and push them lightly with the palm
of your hand to secure.

*60H/70H(SUK)08-12

00.1.5, 11:39 AM

8

Содержание X-70H





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды