WF-930Z
SPECIFICATIONS
I
General
Power source:
AC 110 - 127/220 - 240 V, 50/60 Hz
DC 12 V ["D" size (UM/SUM - 1, R20 or
HP - 2) battery x 8]
Power consumption: 30 W
Output power:
PMPO; 60 W (30 W + 30 W)
(AC operation)
MPO (Max.); 20 W (10 W + 10 W)
(AC operation)
RMS; 10 W (5 W + 5 W)
(DC operation, 10 % T.H.D.)
Input terminal:
Mixing microphone; 600 ohms
Output terminal:
Headphones; 16 -50 ohms
(recommended; 32 ohms)
Dimensions:
Width; 300 mm (11 - 13/16")
Height; 217 mm (8 - 9/16")
Depth; 186 mm (7 - 3/8")
Weight:
2.9 kg (6.4 Ibs.) without batteries
I
Radio section
Frequency range:
FM; 88 - 108 MHz
SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
– 2 –
I
Tape recorder section
Frequency response: 60 - 12,000 Hz (Normal tape)
Signal/noise ratio:
40 dB (TAPE 1, recording/playback)
55 dB (TAPE 2, playback)
Wow and flutter:
0.15 % (WRMS)
Motor:
DC 12 V electric governor
Bias system:
AC bias
Erase system:
Magnet erase
I
Speaker section
Type:
2 - way type
Speakers:
12 cm (4 - 3/4") free - edge
woofer x 2
Tweeter x 2
Maximum input
power:
10 W
Impedance:
3 ohms
Dimensions:
Width; 195 mm (7 - 11/16")
Height; 217 mm (8 - 9/16")
Depth; 189 mm (7 - 1/2")
Weight:
1.2 kg (2.6 Ibs.)/each
Specifications for this model are subject to change without
prior notice.
VOLTAGE SELECTION
Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage as
follows: Slide the AC power supply socket to the visible indication of the side of your local voltage.
AC POWER SUPPLY CORD AND PLUG
QPLGA0250AFZZ
9FGS9822020400
9FGS9822020500
9FGS9821620000
9FGS9822020300
QPLGA0253AFZZ
