06/2/22
WF-5000W(U)2.fm
E-9
TINSEA095AWZZ
Preparation for Use
WF-5000W
ENGLISH
Remote control
Battery installation
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods of time.
This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to malfunction.
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or
similar)
Periodically clean the transmitter on the remote control and the sensor on
the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
Keep the remote control away from moisture, heat, shock, and vibrations.
Test of the remote control
Check the remote control after checking all the connections (see pages 5 - 8).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can
enjoy music.
1
Open the battery cover.
2
Insert the batteries according to the direction indicated in the battery
compartment (back of the battery cover).
When inserting or removing the batteries, push them towards the battery
terminals.
3
Close the cover.
Remote
sensor
