Sharp VL-H400X, Руководство по эксплуатации

Страница: 46 / 53

r - 6
CONNECTION TO
WITH RF
CONVERTER
antenna
or cable
TO ANTENNA IN
2
If your antenna input is connected to a VCR
Disconnect the cable between the and
VCR,
and
insert the RF converter between them as shown below
Use the RF converter and VHF connecting cable,
available as optional accessories.
1
To view the output from your camcorder on the
you must select an unused channel on
your and tune to the output of the RF
converter (factory preset to channel 0).
2
3
4
5
6
7
Set the TV tuner to the same channel.
Remove the antenna cable from your TV and
then connect the RF converter to the cam-
corder as shown.
Then
plug the antenna cable rnto the ANTENNA
IN terminal on the RF converter.
Plug the cable the RF OUT
terminal on the RF converter and the
coaxial antenna terminal on the TV.
Plug the RF converter cable the
AV out
terminals on the
Slide the OPERATE to VCR.
Load a cassette (cassette
outward), and then press the PLAY
button
The may require tuning. Refer to the
operation manual.
l
Use only the RF converter VR-X30RF the
l
The RF converter a sealed Do not attempt to
open or Do not damage, drop or subject the
to
l
Unplug the RF converter storms.
resume normal set the OPERATE
switch to OFF on the or
unplug the
R F
converter cable from the
playback sound monaural
l
The picture may be or
picture playback. does not a the