23
VL-A111S/H/E/AH131S/H/E
VL-AH151S/H/E
5-5. Battery shutoff voltage adjustment
1) Supply power to the main unit, using the variable-voltage DC power supply (range of 2.5V to 5.0V).
2) Set the CAM/OFF/VCR SW to CAM to switch to the camera mode.
3) Load a recordable tape and set the main unit to CAM REC. PAUSE.
4) Set the main unit to TEST mode No. 3, and start recording.
5) Measure voltage between ) and TL2914(GND), and adjust the supply voltage to 3.1V.
6) The adjustment is complete if "BATTERY" is displayed on the monitor screen for a second when the PLAY key of operation unit
is pressed.
7) The adjustment is regarded as proper if the auto shut-off is actuated after the warning is displayed when the TEST mode is cancelled.
*
In case of automatic adjustment of shut-off voltage, adjustment is impossible if voltage is above 3.1V
±
0.2V.
If the adjustment is made at 2.9V or below, the low-voltage operation may become unstable.
5-4. TEST mode
TEST No.
Title
Contents
1
Sensor Off
All the sensors are off except for the cassette control switch, DEW sensor, and battery
sensor.
2
Mecha Adjustment mode
ATF sampling is restricted to the central part.
3
Shut Off Adjustment
Shutoff voltage value is written in E
2
PROM.
4
Error Display
—
5
PASS mode
Track shift (1/4 shift)
6
Cam Adjustment mode
—
7
VCR Adjustment mode
—
8
Head Switching Point ADJ.
If “TEST 8” is selected for normal tape playback, Head Switching Pint is automatically
adjusted.
Note: If “T-03” is selected in the CAM mode while a recordable tape is loaded, the unit starts recording automatically.
T-01
1
Select No with “FF” or “REW” key.
2
Confirm with “PB” key.
•
Measuring instruments:
*Color monitor TV set
*Oscilloscope
*DC cable (AC adapter accessory)
*Digital voltmeter
*Frequency counter
*Video extension cables
*DC power supply
*Signal generator
*Vector scope
*Audio generator (CR oscillator)
*AV output cable (accessory)
*AC adapter
*Alignment tape (JiGWR5-5CSP)
*Video recording tape
(JiGWR5-8CSE)
(For Y/C, audio and servo adjustments)
5-6. VCR section adjustments
5-6-1. VCR section adjustments jigs
Содержание VL-A111S/H/E
Страница 43: ...43 VL A111S H E AH131S H E VL AH151S H E M E M O ...
Страница 67: ...VL A111S H E AH131S H E VL AH151S H E A B C D E F G H I J 1 2 3 4 5 6 7 8 9 10 89 VCR PWB Wiring Side SIDE A ...
Страница 69: ...VL A111S H E AH131S H E VL AH151S H E A B C D E F G H I J 1 2 3 4 5 6 7 8 9 10 91 VCR PWB Wiring Side SIDE B ...
Страница 95: ...117 Ref No Part No Description Code Ref No Part No Description Code VL A111S H E AH131S H E VL AH151S H E ...