Sharp VL-A10K, Руководство по обслуживанию

Страница: 35 / 97

35
VL-A10U/UC/UA/UW/T/K
VL-AH30U/UC/T
Measuring instrument Vector scope
Subject Gray scale
Tape —
Test point VIDEO OUT (Terminated in 75
Ω
)
Adjustment address R-W/B 00, B-W/B 02
Adjustment level R-W/B 0 %
±
3 %
B-W/B 0 %
±
3 %
1) Adjust the spot to the center of vector scope (R-Y : 0%, B-Y : 0%)
using address 00 and 02.
4. White balance adjustment
5. Color gain adjustment
B spot
R-Y
B-Y
R spot
R level
100
°
344
°
Burst
B level
Measuring instrument Vector scope
Subject Color bar chart
Tape —
Test point VIDEO OUT (Terminated in 75
Ω
)
Adjustment address R GAIN 1C4
B GAIN 1C2
R MAT 1C0
B MAT 1BE
Adjustment level R GAIN; Burst ratio 1.2
±
0.1
B GAIN; Burst ratio 1.0
±
0.1
R MAT; 100
±
2
°
B MAT; 344
±
2
°
1) Using the address 1C4, adjust the R level to a burst ratio of 1.2. With
the address 1C2, adjust the B level to a burst ratio of 1.0.
2) Using the address 1C0, adjust the R phase to 100
°
. With the
address 1BE, adjust the B phase to 344
°
.
3) Repeat the above steps 1) and 2).
Measuring instrument Vector scope
Subject Gray scale
Tape —
Test point VIDEO OUT (Terminated in 75
Ω
)
Adjustment address R-OUT DOOR 6C
B-OUT DOOR 6E
Adjustment level R-OUT DOOR; 0
±
3 %
B-OUT DOOR; 0
±
3 %
1) Attach the color temperature conversion filter (JiGHOYA-LB165) to the front of the lens.
2) Using the addresses R-OUT DOOR 6C and B-OUT DOOR 6E, adjust the spot to the center.
3) Take off the color temperature conversion filter.
6. Out door white balance adjustment
Center point
Spot
R-Y
B-Y
When you have finished, write FF to the adress 1FE to exit camera signal
adjustment mode.
Center point
Spot
R-Y
B-Y