manualshive.com logo in svg

Sharp Viewcam VL-Z1U, Руководство по эксплуатации

Поделиться
Скачать
Sharp Viewcam VL-Z1U Скачать руководство пользователя страница 5

v

9. A product and

cart combination
should be
moved with care.
Quick stops,
excessive force,
and uneven
surfaces may cause the product
and cart combination to overturn.

10. Ventilation

C

Slots and openings in

the cabinet are provided for
ventilation and to ensure reliable
operation of the product and to
protect it from overheating, and
these openings must not be
blocked or covered. The openings

should
never be
blocked by
placing the
product on
a bed,

sofa, rug, or other similar surface.
This product should not be placed
in a built-in installation such as a
bookcase or rack unless proper
ventilation is provided or the
manufacturer’s instructions have
been adhered to.

11. Power Sources

C

This product

should be operated only from the
type of power source indicated on
the marking label. If you are not
sure of the type of power supply to
your home, consult your product
dealer or local power company.
For products intended to operate
from battery power, or other
sources, refer to the operating
instructions.

1. Read Instructions

C

All the safety

and operating instructions should
be read before the product is
operated.

2. Retain Instructions

C

The safety

and operating instructions should
be retained for future reference.

3. Heed Warnings

C

All warnings on

the product and in the operating
instructions should be adhered to.

4. Follow Instructions

C

All operating

and use instructions should be
followed.

5. Cleaning

C

Unplug this product

from the wall outlet before
cleaning. Do not use liquid
cleaners or aerosol cleaners. Use
a damp cloth for cleaning.

6. Attachments

C

Do not use attach-

ments not recommended by the
product manufacturer as they may
cause hazards.

7. Water and Moisture

C

Do not use

this product near water

C

for

example, near a bath tub, wash
bowl, kitchen sink, or laundry tub;
in a wet basement; or near a
swimming pool; and the like.

8. Accessories

C

Do not place this

product on an unstable cart,
stand, tripod, bracket, or table.
The product may fall, causing

serious
injury to a
child or
adult, and
serious
damage to

the product. Use only with a cart,
stand, tripod, bracket, or table
recommended by the manu-
facturer, or sold with the product.
Any mounting of the product
should follow the manufacturer’s
instructions, and should use a
mounting accessory recom-
mended by the manufacturer.

IMPORTANT SAFEGUARDS

Содержание Viewcam VL-Z1U








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды