![Sharp ViewCam Slim VL-AX1S Скачать руководство пользователя страница 35](http://html.mh-extra.com/html/sharp/viewcam-slim-vl-ax1s/viewcam-slim-vl-ax1s_operation-manual_366359035.webp)
Preparation
18
Attaching the Shoulder
Strap
1
Hold the end of the strap and thread it
through the loop on the left side of the
power source mounting surface.
2
Loosen the strap in the buckle, and feed
the end of the strap through the buckle,
as shown.
3
Draw the strap in the direction of the
arrow to secure.
4-6
To attach the other end of the strap to
the loop on the left side of the hand
strap, open the hand strap flap, and
perform the same procedure.
Adjusting the Hand
Strap
1
Open the hand strap flap (
1
) and the
grip strap (
2
).
2
Loosen the grip strap, pass your right
hand through the loop, and put your
thumb on the REC START/STOP button
and your forefinger on the Power Zoom
control. Then, pull the grip strap tight
until it fits snugly.
3
Seal the velcro fasteners of the grip
strap and the hand strap flap.
Caution:
• Do not swing the camcorder by the hand strap.
Using the Lens Hood
When recording outdoors on a sunny day or in a
location with bright lighting, attach the supplied
lens hood to the camcorder. Turn the lens hood
in the direction of the arrow to attach it.
To remove it, turn it in the opposite direction.
Notes:
• The lens cap can still be attached on top of the
lens hood.
• Filters and other accessories cannot be attached
on top of the lens hood.
4
5
6
3
2
1
Power zoom control
REC START/
STOP button
Loop
Loop
Buckle
Buckle