manualshive.com logo in svg

Sharp VC-S2000GM, Руководство пользователя, Страница: 47 / 47

Поделиться
Скачать
Sharp VC-S2000GM Скачать руководство пользователя страница 47

GB-47

VCR RESET

1.

Press the 

STOP

 button on the front of the VCR.

2.

Press and hold 

MENU 

and the 

CHANNEL

 (

/

] buttons together for 10 seconds.

✔

VCR RESET IS NOW COMPLETE

Please continue with your previous procedure.

RF CHANNEL TUNING

If you have a preferred RF output channel, this can be set manually (21-69) by following the 

procedure below:

1.

Press the           

STANDBY

 button.

2.

Press and hold the 

MENU

  button on the VCR front panel for 3 seconds.

3.

Wait for a flashing channel number to appear on the VCR display.

4.

The channel number can now be changed by using the 

CHANNEL

                    buttons.

5.

Press the 

SET

 button to store.

6.

Your TV will now require tuning to the new 

channel.

                      (White text with

                                               blue background)

RF THROUGH ON/OFF:

If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR 

can be turned OFF and ON by pressing the 

CLEAR

 button then the 

SET

 button on the 

remote control at point 3 of the 

RF CHANNEL TUNING

 above. This will help minimise 

interference.

/

V CR R F

S E T

: E N T E R

ME NU : E X I T

TINS-3897 ENGLISH.book  Page 47  Thursday, August 31, 2000  5:22 PM

Содержание VC-S2000GM
















































Отзывы:

Нет отзывов