GB-25
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
Normally it will not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
Ensure the video channel is selected on the TV.
1.
Press
MENU
. Press [
/
] to select
SET UP
. Press
SET
to confirm.
2.
CHANNEL PRESET
will be highlighted.
Press
SET
to confirm.
3.
MANUAL TUNING
will be highlighted.
Press
SET
to confirm.
4.
PRESET
will be highlighted. Press
[
/
] to choose the required VCR preset
channel.
5.
Press [
/
] to select SYSTEM, then press
[
/
] to select B/G or D/K according to
your broadcast system.
6.
Press [
/
] to select channel.
7.
Press
to select CH or CC. This will
determine whether off air (CH) or cable (CC) is
tuned first. Note that both off air and cable will
be tuned regardless of the setting.
8.
Press [
/
] to start tuning in either direction.
Tuning will stop when a channel is received. If
it is not the desired channel, press [
/
] to
continue tuning.
9.
Press [
/
] to select
FINE TUNING
. Press and hold [
/
] until the sharpest
colour picture is obtained.
IMPORTANT NOTE:
10.
Press [
/
] to select the
DECODER
. This is preset to OFF. If you connect a satellite
receiver into VCR L2, as shown previously, leave decoder OFF. If you connect a
decoder, as shown previously, you must use [
/
] to turn the decoder function
ON. Refer to
DECODER SWITCHING OPERATION
.
S E T U P
C H A N N E L
P R E S E T
C H A N N E L S O R T
C L O C K
L A N G U A G E
씮
P R E S E T
1
ARD 1
S Y S T EM
B / G D / K
CHANN E L
CH 2 1
F I N E T UN I NG
왗
왘
D E COD E R
ON
O F F
S K I P
ON
O F F
Module 15H.fm Page 25 Monday, November 19, 2001 2:35 PM
http://www.usersmanualguide.com/
