Sharp VC-A565U, Руководство по эксплуатации

Страница: 11 / 40

11
Dimensions: 257
⳯
182 mm
V C - A 5 6 5 U / H 9 6 5 U ( 1 1 - 2 2 )
Setting Up
Connecting the VCR
!
Press POWER to turn the power off.
@
Press TV/VCR , current VCR Output Channel will appear on the LCD display.
#
Each time TV/VCR is pressed for 2 seconds, the LCD display changes as follow:
• VCR Output Channel is automatically set during EZ Set Up.
1. If Channel 3 (or 4) is an active broadcast channel in your area, the Channel 4 (or 3) will be set.
2. If both channel are the active channel or none active channel, the VCR Output Channel will be set to Channel 3.
• Cancelled the EZ Set Up by pressing POWER during EZ Set Up before setting the Output Channel.
• VCR Output Channel will not change to previous VCR Output Channel if TV/VCR is pressed continuosly for more than 2
seconds.
RF 3 = Output Channel 3
RF 4 = Output Channel 4
Current Mode (CLOCK)
Press
TV/VCR
2 sec.
later
Release TV/VCR
Setting the 3
↔
4 Output Channel
The 3
↔
4 Output Channel lets you change the VCR OUTPUT to standard TV broadcasting signals. Both your
TV and VCR must be set to the same channel (i.e TV on channel 3 and VCR OUTPUT channel on 3 too).