Sharp UX-460, Руководство по обслуживанию

Страница: 19 / 69

UX-460U
SW-D1 No. 1 ~ No. 4 Number of rings for auto receive
When the machine is set in the auto receive mode, the number of rings
before answering can be selected. It may be set from one to four rings
using a binary number. Since the facsimile telephone could be used as
an ordinary telephone if the handset is taken off the hook, it should be
programmed to the user’s choice. If the soft switch was set to 1, direct
connection is made to the facsimile. If a facsimile calling beep was heard
when the handset is taken off the hook, press the START key and put
the handset on the hook to have the facsimile start receiving. If it was
set to 0 accidentally, receive ring is set to 1.
NOTE: If the machine is set to answer after a large number of rings, it
may not be able to receive faxes successfully. If you have diffi-
culty receiving faxes, reduce the number of rings to a maximum
of 6.
SW-D1 No. 5 Automatic switching manual to auto receive mode
This soft switch is used to select whether the machine should switch to
the auto receive mode after 5 rings in the manual receive mode or re-
main in the same way as SW-D1 No. 1, No. 2, No. 3 and No. 4 "0"1"0"1"(5
rings).
SW-D1 No. 6 ~ No. 8 Reserved
Set to "0".
SW-D2 No. 1 ~ No. 3 Distinctive ringing setting (Factory setting:
OFF) (PATTERN 4 and 5 are for CANADA only)
This function allows reception of services offered by USA and Canada
telephone companies in which the customer contracts with the telephone
company to have up to 4 telephone numbers (USA), or 6 telephone
numbers (Canada) established for one line.
Each telephone number is signalled by a different ringing pattern, and
the customer can allocate each number to a specific use.
〈
Example of use
〉
2 – 14
SW-D2 No. 4 Reserved
Set to "0".
SW-D2 No. 5 Caller ID function
Used for Caller ID function.
SW-D2 No. 6, No. 7 CI off detection timer (Distinctive ring setting
off only)
Set the minimum time period of CI signal interruption which affords to be
judged as a CI OFF section.
A B
400msec
2000msec
1
2
SW-D2 No. 8 Caller ID detect during CI off
Detection of caller ID signal is performed as follows:
0: First CI OFF only
1: All of CI OFF
SW-E1 No. 1 ~ No. 8 Reserved
Set to "0".
SW-E2 No. 1 ~ No. 8 Reserved
Set to "0".
〈
Distinctive Ringing Timing Specifications
〉
1) USA
DISTINCTIVE RING
→
1:RING PATTERN 1
→
2:RING PATTERN 2
↑ ↓
5:OFF SETTING
←
4:STANDARD RING
←
3:RING PATTERN 3
2) Canada
DISTINCTIVE RING
→
1:RING PATTERN 1
→
2:RING PATTERN 2
↑ ↓
7:OFF SETTING 3 :RING PATTERN 3
↑ ↓
6:STANDARD RING
←
5:RING PATTERN 5
←
4 :RING PATTERN 4
• Ring Pattern
STANDARD has 5 ring patterns, and DISTINCTIVE has 9 patterns.
Ring patterns
1
~
4
for USA, and
5
~
9
for Canada.
However, to make the setting procedure as easy as possible for
the user to understand, these patterns are grouped as follows:
〈
Optional Setting
〉
1) RING PATTERN 1 RING PATTERN
1
for USA
RING PATTERN
4
for USA
RING PATTERN
5
for Canada
2) RING PATTERN 2 RING PATTERN
2
for USA
RING PATTERN
6
for Canada
3) RING PATTERN 3 RING PATTERN
3
for USA
RING PATTERN
7
for Canada
4) RING PATTERN 4 RING PATTERN
8
for Canada
5) RING PATTERN 5 RING PATTERN
9
for Canada
6) STANDARD RING
7) OFF SETTING
Phone Number Intended Ring Pattern
Purpose
One phone line 555-1234 Voice Calls Standard
555-1235 Facsimile Calls Pattern 1
555-1236 Answering Pattern 2
Machine
555-1237 PC Modem Pattern 3
1S 1S
0.5S
RING
PATTERN 5
for CANADA
0.25S 0.25S
0.2S
6S
2S ring
4S ring
1.5S ring
3S ring
1S ring
4S ring
1.5S ring
4S ring
0.8S
4S ring
0.3S
4S ring
0.4S
4S ring
1S
3S ring
0.5S
0.5S
2S ring
2S ring
0.5S
0.5S
1S
0.2S
0.8S
0.4S
0.3S
0.2S
0.4S 0.8S
0.2S 0.2S
1S
1S
1S 0.5S
0.5S 0.5S
0.5S
1S
0.5S 0.5S
STANDARD
RING
PATTERN 1
for USA
RING
PATTERN 2
for USA
RING
PATTERN 3
for USA
RING
PATTERN 6
for CANADA
RING
PATTERN 7
for CANADA
RING
PATTERN 4
for USA
0.25S 0.25S 0.25S
0.2S 0.2S
RING
PATTERN 8
for CANADA
RING
PATTERN 9
for CANADA