UX-108DE
[2] Diagnostics and service soft switch
1. Operating procedure
(1) Entering the diagnostic mode
Press FUNC
→
9
→
→
8
→
#
→
7 , and the following display will appear.
ROM Ver. FXA0 After 2 sec: DIAG MODE
FXA0
Then press the START key. Select the desired item with the key or the # key or select with the rapid key. Enter the mode with the START key.
(Diag
•
specifications)
2. Diagnostic items
ITEM
DIRECT
Contents
Function
No.
key
1
1
SOFT SWITCH MODE
Soft switches are displayed and changed. List can be output.
2
2
ROM & RAM CHECK
ROM is sum-checked, and RAM is matched. Result list is output.
3
3
AGING MODE
10 sheets of check patterns are output every 5 minutes per sheet.
4
4
PANEL CHECK MODE
Panel keys are tested. Result list is output.
5
5
CHECK PATTERN MODE Check pattern is output.
6
6
SIGNAL SEND MODE
Various signals of FAX communication are output.
7
7
MEMORY CLEAR MODE Back-up memory is cleared, and is set at delivery.
8
8
SHADING MODE
Shading compensation is performed in this mode.
9
9
ALL BLACK MODE
To check the print head, whole dots are printed over the interval of 2 m.
10
10
AUTO FEEDER MODE
Insertion and discharge of document are tested.
11
−
MESSAGE PRINT MODE
The display message of each language is printed out together with the English equivalent.
12
−
RING & DIAL FREE MODE Allows CI detection of 13Hz or more. Eliminates dial tone detection in auto dial.
If the diag mode cannot be set, repeat the diag mode operation, per-
forming the following operation.
After the power is turned on and "WAIT A MOMENT" is indicated, press
the STOP key.
2 – 2
In relation with the process response (request from Production
Engineering)
"
WAIT A MOMENT
"
clock indication may appear
depending on STOP key timing. If the STOP key is held down,
"
MEMORY CLEAR?
"
appears.
FUNC
DIAG MODE
9
8
7
START
1
Soft switch mode
START
2
ROM & RAM check
START
3
Aging mode
START
4
Panel check mode
START
5
Check pattern mode
START
6
Signal send mode
START
7
Memory clear mode
Shading mode
START
START
All black mode
START
10
Auto feeder mode
START
9
Message print mode
Ring & Dial free mode
START
START
8
START
KEY
STOP
KEY
+
+
"Power ON"
Memory clear
(Work + Backup)
FXA0
Содержание UX-108
