Sharp STR3065HS Скачать руководство пользователя страница 4

 4

E

INSTALLATION OPTIONS

Installation of the Smart Radiant Rangetop with Microwave 

Drawer

™ 

Oven is very customizable. To choose the right installation 

option, consider the following items: 
•  The front of the 

Microwave Drawer

™ 

Oven

 can be standard, which 

is 1

3

/

4

" forward of the cabinet face, or flush with the cabinet face. 

•  The surface of the rangetop can be elevated 

5

/

16

" above the 

countertop or flush with the countertop. 

•  Back trim can be included or left off.  
How the unit is mounted is a matter of preference and does not affect 

functionality. However, if you desire to use Side Accessories (not 

included), an elevated rangetop is recommended. To install with an 

elevated top, use dimension (A) for the opening height.

Standard Mount with Back Trim

 

This installation style positions the unit with the Drawer front 

proudly forward of the cabinet face and includes the use of the 

optional back trim. The rangetop surface can be elevated (A) or 

flush (B).

90˚

1

1

/

8

" (28.6 mm) back trim

1" (25.4 mm)

2" (50.8 mm)

mounting 

cleat, 

flush with 

cabinet 

face

1

1

/

2

"

(37.6 mm)

221/8"

(562.4 mm)

surface

24" (609.6 mm)

A.

18

1

/

2

"

(469.9 mm)

B.

18

13

/

16

"

(478 mm)

Flush Mount with Back Trim 

This installation style positions the unit with the Drawer front flush 

with the cabinet face and includes the use of the optional back trim. 

The rangetop surface can be elevated (A) or flush (B).  

1

5

/

16

" (33.3 mm)

90˚

22

15

/

16

"

(582.7 mm)

1

1

/

8

" (28.6 mm) back trim

1

1

/

2

"

(37.6 mm)

mounting cleat, 

13

/

16

" (20.6 mm)

inside cabinet

face 

surface

24" (609.6 mm)

back splash

A.

18

1

/

2

"

(469.9 mm)

B.

18

13

/

16

"

(478 mm)

Flush Mount without Back Trim (Island Installation)

This installation style positions the unit with the Drawer front flush 

with the cabinet face and does not include back trim. This style is 

recommended for installation into an island counter. The rangetop 

surface can be elevated (A) or flush (B).

1

5

/

16

" (33.3mm)

90˚

1

1

/

2

"

(37.6 mm)

mounting

cleat,

13

/

16

(20.6 mm)

inside 

cabinet face

22

15

/

16

"

(582.7 mm)

surface

24" (609.6 mm)

A.

18

1

/

2

"

(469.9 mm)

B.

18

13

/

16

"

(478 mm)

Содержание STR3065HS

















Отзывы: