16
TIME COOK
1. Press TIME COOK pad.
2. Press number pads for the cooking
time.
3. Press POWER LEVEL pad.
4. Press number pads for power level
(0~10).
5. Press START pad.
The M/W indicator lights.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip 3 and 4 step, 100% power is automatic.
NOTE :
Your oven can be programmed for
59 minutes 99 seconds. (59:99)
NOTE :
Your oven can be programmed for
59 minutes 99 seconds. (59:99)
NOTE :
Using lower power levels increases the cooking time which is recommended for foods such as cheese,
milk and slow cooking of meats.
When you press START pad, the M/W indicator starts blinking to show the oven is cooking.
The display counts down the time to show how much cooking time is left. When the cooking time ends, you will hear
3 beeps.
C O N T R O L S
COOKING IN TWO STAGES
All recipes require the frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.
When you press START pad, the DEF and M/W indicators come on to confirm the power levels selected. The DEF
indicator starts blinking to show you that the oven is in TIME DEFROST mode.
The display counts down the time remaining in TIME DEFROST mode. When the oven beeps, turn over, break apart
and/or redistribute the food. At the end of TIME DEFROST mode, the oven will beep and start M/W cook.
The DEF indicator goes off and the M/W indicator starts blinking. The display counts down the time remaining in
M/W mode. When M/W cook ends, you will hear 3 beeps.
1. Press DEFROST pad.
2. Press number pads for the defrosting
time you want.
3. Press TIME COOK pad.
4. Press number pads for the cooking
time.
5. Press POWER LEVEL pad.
6. Press number pads for power level
(0~10)
7. Press START pad.
The Defrost indicator lights and “ : 0” is displayed.
The display will show what you pressed.
The M/W indicator lights.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10
If you skip 3 and 4 step, 100% power is automatic.