Sharp SJ-X43GP, Руководство по эксплуатации

Страница: 16 / 20

16
How to check the current
temperature level
The indicator will be “ON ” to show the current temperature
level by pressing “R” or “F” button.
Refrigerator compartment : Press “R” button.
Freezer compartment
: Press “F” button.
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
1.
Press “R” button.
Beep
2.
Press “R” button to change the temperature level.
Freezer compartment
1.
Press “F” button.
Beep
2.
Press “F” button to change the temperature level.
● Temperature indicator changes as the pictures below
(
3 → 4 → 5 → 1 → 2 → 3 ) in each case (Refrigerator compartment
/ Freezer compartment) by pressing “R” or “F” button.
1
2
3
4
5
<Factory setting>
Level Indicator
NOTE
● At fi rst, both compartments are set at “Factory setting”.
●
After adjusting the temperature level, the indicator will turn
off approximately 5 seconds later.
● When the operation of refrigerator stops because of power
failure, temperature setting is restarted from the previous
setting at the time of re-power.
Controlling Temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
Advanced Setting of Refrigerator / Freezer
compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level
1 ~ 9 ) by following steps.
Refrigerator compartment
1.
Press “R” button fi rst. Hold down “R” button and then press
“Express freezing” button for 3 seconds or more.
Beep beep beep
The indicator will return to “Factory setting”.
2.
Press “R” button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
1.
Press “F” button fi rst. Hold down “F” button and then press
“Express freezing” button for 3 seconds or more.
Beep beep beep
The indicator will return to “Factory setting”.
2.
Press “F” button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
●
Temperature indicator changes as the pictures
below (
5 → 6 → 7 → 8 → 9 → 1 → 2 → 3 → 4 → 5 )
in each case (Refrigerator compartment /
Freezer compartment) by pressing “R” or “F”
button.
1
2
3
4
5
6
7
8
9
... ...
...
Level Indicator
<Factory setting>
OFF Lighting Flashing
SJ-XP400PG_EN.indd Sec1:16 SJ-XP400PG_EN.indd Sec1:16 27/11/2014 13:37:40 27/11/2014 13:37:40