Sharp SJ-X400EM, Руководство по эксплуатации

Страница: 16 / 20

16
Temperature indicator changes as the pictures below •
( 3→4→5→1→2→3 ) in each case (Refrigerator compartment
/ Freezer compartment) by pressing “R” or “F” button.
1
2
3
4
5
NOTE
At first, both compartments are set at “Factory setting”. •
After adjusting the temperature level, the indicator will turn off •
approximately 5 seconds later.
When the operation of refrigerator stops because of power •
failure, temperature setting is restarted from the previous
setting at the time of re-power.
Advanced Setting of Refrigerator /
Freezer compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level 1 ~ 9 ) by following steps.
Refrigerator compartment
Press “R” button first. Hold down “R” button and then press
1 .
“Express freezing” button for 3 seconds or more.
The indicator will return to “Factory setting”.
Press “R” button to change the temperature level.
2 .
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
Press “F” button first. Hold down “F” button and then press
1 .
“Express freezing” button for 3 seconds or more.
The indicator will return to “Factory setting”.
Press “F” button to change the temperature level.
2 .
Follow step 1 again if you want to adjust the temperature in 5 levels.
Controlling Temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
How to check the current temperature
level
The indicator will be “ON ” to show the current temperature
level by pressing “R” or “F” button.
Refrigerator compartment : Press “R” button.
Freezer compartment
: Press “F” button.
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
Press “R” button.
1 .
Press “R” button to change the temperature level.
2 .
Freezer compartment
Press “F” button.
1 .
Press “F” button to change the temperature level.
2 .
Beep beep beep
Beep
Beep
Level
Indicator
<Factory setting>
Beep beep beep
Temperature indicator changes as the pictures •
below ( 5→6→7→8→9→1→2→3→4→5 ) in
each case (Refrigerator compartment / Freezer
compartment) by pressing “R” or “F” button.
1
2
3
4
5
6
7
8
9
... ...
...
<Factory setting>
OFF Lighting Flashing
Level Indicator
(B611).indb 16 2014/11/17 15:32:13