Sharp SJ-S1212E2W-UA, Руководство пользователя

Страница: 9 / 24

EN -7-
CHAPTER -3: USING YOUR FREEZER
Warnings for temperature settings
• The ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the
temperature in the freezer. If required,change the temperature setting.
• It is not recommended that you operate your freezer in environments colder than 10°C .
• The temperature setting should be set by taking into consideration how often the freezer door is opened and
closed, how much food is stored in the freezer and the environment in which and the positioning of the appliance.
• We recommend that when first using the freezer it should be left running for 24 hours uninterrupted to ensure
it is completely cooled. Do not open the freezer door, or put food inside for this period.
• Your freezer has a 5 minute built in delay function, designed to prevent damage to the compressor. When power
is applied to your freezer, it will begin to operate normally after 5 minutes.
• Your freezer is designed to operate in the ambient temperature intervals stated in the standards, according
to the climate class stated in the information label. It is not recommended that your freezer is operated in the
environments which are out of the stated temperature intervals in terms of cooling efficiency.
Fast Freezing Mode
• To freeze plenty of food
• To freeze ready foods
• To freeze foods rapidly
• To store the seasonal foods for a long time
How to use;
• Press the MODE button until fast freezing mode.
• While fast freezing mode lamp is flashing if no button is clicked for 5
seconds then a beep sound will be heard and the mode will be enabled.
• While the fast freezing mode is active the letters “SF” will be seen at the
indicator of the freezer.
While SF mode is selected:
To cancel SF mode and continue with previous set value:
Please press MODE button 2 times and wait for 5 secs. SF mode will be cancelled and appliance will start to work
according to previous set value.
To cancel SF mode and continue with new set value:
Please press MODE button 1 time and in 5 sec, push SET button until you see set value you want and wait for 5
secs. SF mode will be cancelled and appliance will start to work according to new set value.
To cancel SF mode and activate economy mode:
Please press MODE button 3 times and wait for 5 secs. SF mode will be cancelled and appliance will start to work
according to economy mode.
Note: Super freezing mode will be cancelled automatically after 24 hours or when the freezer sensor temperature falls
below -32°C.
If super freeze mode is finished automatically, SF led will continue to light. It is enough to push MODE button to turn
off SF led.
Economy mode
Your freezer will consume minimum energy at -18°C set value which is the most optimum storage condition.
When to use;
When you want your refrigerator to operate economically.
How to use;
• Press the MODE button until economy mode led lights up (3 times).
• While the economy mode led is flashing if no button is clicked then a beep
sound will be heard and the mode will be enabled.
• During this mode, the freezer compartment operate at the special
temperature value set on the control circuit.
• While the economy mode is active the letters "Ec" will be seen at the
indicator the freezer compartment.
While economy mode is selected;
To cancel economy mode and continue with previous set value:
Please press MODE button 3 times and wait for 5 secs. Economy mode will be cancelled and appliance will start
to work according to previous set value.
To cancel SF mode and continue with new set value:
Please press MODE button 1 time and in 5 sec, push SET button until you see set value you want and wait for 5
secs. Economy mode will be cancelled and appliance will start to work according to new set value.
To cancel economy mode and activate SF Mode:
Please press MODE button 3 times and wait for 5 secs. Economy mode will be cancelled and appliance will start
to work according to SF mode.