Sharp SJ-S1197E00X-EN, Руководство пользователя, Страница: 10 / 16

EN -8-
CHAPTER -3: USING YOUR FREEZER
Using the Control Panel
1. Freezer temperature set button
2. Super freeze symbol (Super freeze LED)
3. Alarm symbol (Alarm LED)
4. Freezer adjusted temperature indicator
Operating your Freezer
Freezer Temperature Set Button
This button allows setting temperature of the freezer. In order to set values for freezer partition, press this button. Use
this button also to activate super freeze mode.
Super Freezer Mode
When Would It Be Used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How To Use?
• Press temperature set button until super freezing light comes on.
• Super freezing led will light during this mode.
• Maximum amount of fresh food (in kilograms) to be frozen within 24 hours is shown on the appliance label.
• For optimal appliance performance in maximum freezer capacity, set the appliance to active super freeze mode
24 hours before you put the fresh food into the freezer.
During This Mode:
If you press temperature set button, the mode will be cancelled and the setting will be restored from -16.
The super freezing mode will cancel automatically after 24 hours or when the freezer temperature falls below
-32°C.
Freezer Temperature Settings
• The initial temperature of the setting display is -18°C.
• Press freezer setting button once.
• Every time you press the button, the setting temperature will decrease. (-16°C, -18°C, -20°C,.. super freezing)
• If you press freezer setting button until super freezer symbol is displayed on freezer.
• Settings display and you do not press any button within the following 3 seconds, super freezing will blink.
• If you keep on pressing, it will restart from last value.
Recommended Temperature Values for Freezer
When to adjust Inner Temperature
For minimum freezing capacity -16
o
C, -17
o
C
In normal usage
-18
o
C, -19
o
C, -20
o
C,
-21
o
C
For maximum freezing capacity -22
o
C, -23
o
C, -24
o
C
Temperature Adjustment Warnings
• It is not recommended that you operate your freezer in environments colder than 10°C in terms of its efficiency.
• Do not start another adjustment while you are already making an adjustment.
• Temperature adjustments should be made according to the frequency of door openings, the quantity of food
kept inside the freezer and the ambient temperature in the location of your freezer.
• In order to allow your freezer to reach the operating temperature after being connected to mains, do not open
the door frequently or place large quantities of food in the freezer. Please note that, depending on the ambient
temperature, it may take 24 hours for your freezer to reach the operating temperature.
• A 5 minute delay function is applied to prevent damage to the compressor of your freezer when connecting
or disconnecting to mains, or when an energy breakdown occurs. Your freezer will begin to operate normally
after 5 minutes.
• Your appliance is designed to operate in the ambient
temperature (T/SN = 10°C - 43°C) intervals stated in the
standards, according to the climate class displayed on the
information label. We do not recommend operating your
appliance out of the stated temperature limits in terms of
cooling effectiveness.
Climate Class Ambient Temperature
o
C
T
Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)