Sharp SJ-BB10DTXLF-EN, Руководство пользователя

Страница: 15 / 20

EN -14-
CHAPTER -8: TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, well-ventilated room, but not in direct sunlight and not near a heat source (such as
a radiator or oven) otherwise an insulating plate should be used.
2. Allow warm food and drinks to cool before placing them inside the appliance.
3. Place thawing food in the refrigerator compartment. The low temperature of the frozen food will help cool the
refrigerator compartment while the food is thawing. This will save energy. Frozen food left to thaw outside of the
appliance will result in a waste of energy.
4. Drinks or other liquids should be covered when inside the appliance. If left uncovered, the humidity inside the
appliance will increase, therefore the appliance uses more energy. Keeping drinks and other liquids covered helps
preserve their smell and taste.
5. Avoid keeping the doors open for long periods and opening the doors too frequently as warm air will enter the
appliance and cause the compressor to switch on unnecessarily often.
6. Keep the covers of the different temperature compartments (such as the crisper and chiller) closed.
7. The door gasket must be clean and pliable. Replace gaskets if worn.
8. Energy consumption is declared with maximum load and using only bottom freezer drawer and bottom glass shelf.
CHAPTER -9: INFORMATION FOR TEST INSTITUTES
CHAPTER -10: SERVICE & WARRANTY
CHAPTER -11: TECHNICAL DATA
If you are unable to resolve a problem using the checks covered in the last few pages, do not attempt to service this
fridge freezer yourself.
In the unlikely event of the product requiring repair, please contact the Customer Support Centre. Telephone: 0333 577
7230 Lines are open Mon to Fri 09.00 to 17.00
Vestel UK the licence partner for Sharp guarantees that for a period of 2 years from the date of purchase the enclosed
product will be free from defects in materials and workmanship. Vestel UK agrees to provide for the repair or, at
its option, the replacement of a defective product. Vestel UK reserves the right to replace defective parts, or the
product, with new or refurbished items. Items that are replaced become the property of Vestel UK. To benefit from this
guarantee, any fault that occurs must be notified to Vestel UK, or it’s appointed Service Facility, within two years from
the date the product was purchased. Proof of purchase, such as a receipt or invoice, must be provided. If the product
is exchanged, the replacement shall be covered by the unexpired portion of the original guarantee.
This guarantee shall only apply to faults that are due to an electrical or mechanical breakdown. It does not cover faults
or damage caused by accident, misuse, fair wear and tear, neglect, tampering with the product, or repair other than by
a Service Facility appointed by Vestel UK.
The product is intended for private domestic use only. The guarantee will not apply if the product is used in the course
of a business, trade or profession.
The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the
performance of the appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this
appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model
name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.
Appliances for EcoDesign verification should be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User Manual
in
Chapter 2. Please contact the manufacturer for any other further information, including loading plans.