Sharp SJ-BB02DTXL1-UA, Руководство пользователя, Страница: 8 / 28

EN -6-
CHAPTER -1: GENERAL WARNINGS
Before using your fridge freezer
• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge freezer
if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevent damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and will
fade away as the fridge starts to cool.
• Install using the plastic spacer guides, which can be seen on the condenser at the rear of
the appliance Turn 90 degrees (as shown in the diagram). This will keep the condenser from
touching the wall.
• Refrigerator should be placed against a wall with a clearance distance not exceeding 75 mm.
CHAPTER -2: YOUR FRIDGE FREEZER
(When the thermostat is
positioned on top)
Lamp cover
Thermostat
10
11
12
A) Fridge compartment
B) Freezer compartment
1) Thermostat box (When the thermostat is
positioned on side)
2) Fridge compartment shelves
3)Crisper cover
4) Crisper
5) Freezer drawers
6) Freezer glass shelves *
7) Bottle shelf
8) Adjustable door shelf (Adapti-Lift)* / Door shelf
9) Door upper shelves
10) Egg holder
11) Ice box tray
12) Ice scraper*
* In some models
This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.
B
1
7
6
5
4
3
2
A
9
8