Sharp SJ-B1297M1I-EN, Руководство пользователя

Страница: 12 / 16

EN -12-
CHAPTER -6: TROUBLESHOOTING
Check Warnings;
If your fridge is not operating;
•
Is there any electrical fault?
•
Is the plug is placed properly in the socket outlet?
•
Is the fuse of the socket outlet that the plug is plugged or the main fuse blown?
•
Is the thermostat setting is on “ ” position?
•
Is there any fault in the socket outlet? Examine this by plugging your fridge into a socket outlet which you are
sure that is working.
If your fridge is not cooling enough;
•
Is the thermostat setting is on “1” position?
•
Is the door of your fridge opened frequently and left open for a long while?
•
Is the door of fridge closed properly?
•
Did you put a dish or food on your fridge so that it contacts the rear wall of your fridge so as to prevent the air
circulation?
• Is your fridge filled excessively?
•
Is there adequate distance between your fridge and the rear and side walls?
• Is the ambient temperature within the range of values specified in the operating manual?
If the food in your refrigerator compartment is over cooled
•
Is the thermostat adjustment right?
•
Are there many food recently put inside the freezer compartment? If so, your fridge may over cool the food
inside the refrigerator compartment as it will operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from time to time. Noises from your fridge at this time
are normal and due to its function. When the required cooling level is reached, noises will be decreased automatically.
If the noises persist;
•
Is your appliance stable? Are the legs adjusted?
•
Is there anything behind your fridge?
•
Are the shelves or dishes on the shelves vibrating? Re-place the shelves and/or dishes if this is the case.
•
Are the items placed on your fridge vibrating?
Normal Noises;
Cracking (Ice cracking) Noise:
•
During automatic defrosting.
•
When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking: Heard when the thermostat switches the compressor on/off.
Compressor noise (Normal motor noise): This noise means that the compressor operates normally Compressor
may cause more noise for a short time when it is activated.
Bubbling noise and splash:
This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise: Normal flow noise of water flowing to the evaporation container during defrosting. This noise
can be heard during defrosting.
Air Blowing Noise (Normal fan noise): This noise can be heard in No-Frost fridge during normal operation of
the system due to the circulation of air.
If humidity builds up inside the fridge;
•
Has the food been properly packaged? Have the containers been well dried before they were put into the
refrigerator?
•
Are the doors of the refrigerator opened very frequently? When the door is opened, the humidity found in the
air in the room enters the refrigerator. Especially if the humidity rate in the room is too high, the more frequently
the door is opened the faster will be the humidification.
•
It is normal to have water drops formed on the back wall following the automatic defrosting process. (In Static
Models)
If the doors are not opened and closed properly;
•
Do the food packages prevent closing of the door?
•
Are the door compartments, shelves and drawers placed properly?
•
Are door gaskets broken or torn?
•
Is your fridge on a level surface?
If the edges of fridge cabinet that the door joint contact are warm;
Especially in summer (hot weather), the surfaces that the joint contact may get warmer during the operation of the
compressor, this is normal.
IMPORTANT NOTES:
•
The compressor protection thermal fuse will cutout after sudden power breakdowns or after unplugging the
appliance, because the gas in the cooling system is not stabilised. This is quite normal, and the fridge will
restart after 4 or 5 minutes.