Sharp SHC2432FS Скачать руководство пользователя страница 3

3

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), 

when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, 

either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the 

purchaser for parts or labor for the period(s) set forth below. 
This warranty does not apply to any cosmetic or appearance items of the Product nor to the additional excluded item(s) set forth below 

nor to any Product the exterior of which has been damaged or defaced, which has been subjected to misuse, abnormal service or 

handling, or which has been altered or modified in design or construction. In order to enforce the rights under this limited warranty, 

the purchaser should follow the steps set forth below and provide proof of purchase to the servicer. 
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED 

WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO 

THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an 

implied warranty lasts, so the above limitation may not apply to you. 
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, 

or to extend the duration of any warranties beyond the time period described above on behalf of Sharp. The warranties described 

herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. 

Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities 

and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether 

based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages 

or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. 

Nor shall Sharp be liable or in any way responsible for any incident or consequential economic or property damage. Some states do 

not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. 
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND 

PUERTO RICO.

Product model number & 

description:

SHC2432FS, SHC3042FS, SHC3062FS or SHC3662FS Range Hood

Warranty period for this product:

One (1) year parts and labor, including in-home service. 

Additional item(s) excluded from 

warranty coverage:

Commercial, non-residential, or use inconsistent with published installation and product 

operational instructions. 
Light bulbs and filters.
In home instruction on how to use your product.

What to do to obtain service:

In-home service is provided for one year from date of purchase. Service can be arranged by 

calling 1-800-BE-SHARP. Be sure to have Proof of Purchase, Model, and Serial Number 

available.

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP or visit www.sharpusa.com. 
SAVE THE PROOF OF PURCHASE AS IT IS NEEDED SHOULD YOUR RANGE HOOD EVER REQUIRE WARRANTY 

SERVICE.

Содержание SHC2432FS





















Отзывы: