Sharp SH9010C, Руководство пользователя

Страница: 107 / 125

106 Connectivity
Connectivity
Bluetooth
Keep your phone within a distance of 10 metres from the devices
before searching.
Using the Bluetooth Wireless Function
To Turn On or Off the Bluetooth Wireless Function
“Connectivity”
→
“Bluetooth”
→
“Switch On/Off”
1.
Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless setting is
activated, and “ ” is displayed.
To Search for Devices to be Paired
A maximum of 16 devices can be searched for.
“Connectivity”
→
“Bluetooth”
→
“Search for Devices”
1.
Select the desired device for pairing.
2.
Enter the device passcode.
Note
• You can search for devices even when the Bluetooth wireless
function is off. Once pairing is started, the phone turns the
Bluetooth wireless function on automatically.
• You can only select one device for pairing. To change the paired
device, see “To Activate the Paired Device” on page 106.
• Pairing means authentication has been established between the
two devices.
• In order to pair two devices with Bluetooth wireless technology,
the users should agree on the same passcode for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time the
devices are connected.
• Devices that do not have a user interface (i.e., headsets and car
kits) have a factory-set passcode. See the user guide for the
device.
To Activate the Paired Device
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1.
Press
d
to switch to the list for handsfree devices.
2.
Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1.
Press d to switch to the list for handsfree devices.
2.
Highlight the desired handsfree device.
3.
Press [Options] and select “Set prior Connect”.
To Check the Audio Device
“Connectivity”
→
“Bluetooth”
→
“Paired Devices”
1.
Press
d
twice to switch to the list for Audio devices.
2.
Highlight the desired Audio device.
3.
Press [Options] and select “Set prior Connect”.
(M 12)
(M 12-1)
(M 12-1-1)
(M 12-1-2)