background image

E-22

SD-AS10H_SEEG_E.fm

05/3/17

ENGLISH

TINSZA116AWZZ

F

S

V

I

N

P

E

D

SD-AS10H

D

V

D Oper

ation

- Ins

e

rt

ing a

nd r

e

mo

v

ing dis

c

s

 -

 

Caution:

"

Do not press the disc compartment or force it open by hand. Malfunction may
occur.

"

Do not touch the disc compartment whilst it is moving, and be careful not to pinch
your fingers.

"

If the power fails whilst the compartment is open, wait until the power is restored.

"

If the disc compartment is stopped with force, the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power stand-by mode and
then turn the unit on again.

"

If you turn off the power with the disc compartment open, the compartment closes.

"

Do not let coins, clips, etc. get into the disc insertion slot. Malfunction may occur.

 

!

To remove the disc  

5

Insert a disc into the slot with the label toward you.

Leave about 40 mm (1-1/2") out of the disc compartment.

Disc insertion angle differs depending on the installation direction.

6

When inserting one disc:

Press the OPEN/CLOSE button.

"

The disc enters the slot and the disc compart-
ment closes.

"

The same operation can be performed by 
pressing the   button on the remote control.

Repeat steps 3 - 6 to insert a disc into the DISC 
2 - 5 slots.

When inserting discs sequentially:

When the disc is set in the slot, press one of the DISC 1 - 5 buttons (button 
whose indicator is off) to select a slot for the next disc.
Within 10 seconds, press the OPEN/CLOSE button.
The disc enters the slot and the unit switches to the selected slot. The disc 
compartment does not close.
Insert the next disc in the slot and repeat steps   -  .
Press the OPEN/CLOSE button to close the disc compartment.

Disc insertion slot

Label side

40 mm
(1-1/2")

Caution when inserting discs:

"

Insert a disc straight, not diagonally. 
Otherwise the disc or disc compartment 
may be damaged.

"

A disc may be caught inside unless inserted 
straightly. In this case, remove and insert 
the disc again.

"

8 cm (3") discs are not supported (disc 
adaptor cannot be used).

"

Do not touch the playback side.

"

Do not insert two discs in one disc insertion slot.

"

A disc with scratches or fingerprints may not play properly. Refer to "Care of discs" 
(page 65) and clean the disc.

"

Do not insert discs with labels, stickers or 
glue attached. If inserted, they may not be 
removed from the compartment, or damage 
may result to the main unit or discs.

"

Do not use the discs of special shapes 
(heart, octagon shaped, etc.). They may 
cause damage to the main unit or discs.

Example: Removing a disc from the DISC 1 slot
1

Press the DISC 1 button.

2

Within 10 seconds, press the OPEN/
CLOSE button.

3

Remove the disc.
To remove more discs, repeat steps 1 - 3.

4

Press the OPEN/CLOSE button to close 
the disc compartment.

YES

Disc

NO

Disc

YES

12 cm (5")

NO

8 cm (3")

Содержание SD-AS10H















































































Отзывы: