GB-3
ENGLISH
OVEN AND ACCESSORIES
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not
damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating element
thoroughly, these must be dry and free from grease. Built-up grease may overheat and begin to smoke or
catch fire.
• Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough,
even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the
oven.
• All food and containers of food are always placed on the turntable for cooking.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the
oven. This does not affect cooking performance.
WARNING:
The door, outer cabinet, oven cavity, accessories and dishes will become very hot during operation.
To prevent burns, always use thick oven gloves.
OVEN
1.
Door
2.
Door
hinges
3.
Oven
lamp
4.
Waveguide cover (DO NOT REMOVE)
5.
Coupling
6.
Oven
cavity
7.
Convection fan (covered)
8.
Grill heating element (below the ceiling and back
side of the interior)
9.
Control panel
10.
Door latches
11.
Door seals and sealing surfaces
12.
Door safety latches
13.
Ventilation
openings
14.
Outer
cabinet
15.
Power supply cord
16.
Door
handle
ACCESSORIES:
Check to make sure the following accessories are
provided:
(
17
) Turntable (
18
) Turntable support (
19
) Coupling
(
20
) Rack
• Place the turntable support in the centre of the
oven floor so that it can freely rotate around the
coupling. Then place the turntable on to the turn-
table support so that it locates firmly into the cou-
pling.
• To avoid turntable damage, ensure dishes and con-
tainers are lifted clear of the turntable rim when
removing them from the oven.
• For use of the rack, refer to the grilling sections on
pages GB-10.
Never touch the grill when it is hot.
NOTE:
When you order accessories, please mention
two items: part name and model name to your deal-
er or SHARP authorised service agent.
Hub (inside)
17. Turntable
(glass)
19. Coupling
18. Turntable
support
20. Rack
2
7
8
3
9
12
4
5
6
11
10
16
1
13
14
15
R-82ST_OM_WEST.indb Sek1:3
R-82ST_OM_WEST.indb Sek1:3
2012-06-27 01:09:15
2012-06-27 01:09:15
