E-7
Step
Procedure
Pad Order
Display
1
Flashing eights
Clock Setting
Step
Procedure
Pad Order
Display
Press the Timer/Clock pad.
* To enter the present time of day 11:34 (AM or PM).
BEFORE OPERATING
Enter the correct time of day by pressing
the numbers in sequence.
2
3
Getting Started
Only the dots will remain.
2
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
will appear in the
display. Press the STOP/Clear pad and re-enter the time of day (eg. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some area
where the frequency varies. It is recommended that you should adjust the time occasionally.
If you wish to know the time of day during the cooking or timer mode, press the Timer/Clock pad. As long
as your finger is pressing the Timer/Clock pad, the time of day will be displayed.
Press the STOP/Clear pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
Press the STOP/Clear pad twice.
Stop/Clear
To Cancel a Programme During Cooking
Press the Timer/Clock pad again.
The dots (:) will flash on and
off.
Press the STOP/Clear pad so that the oven
beeps.
Plug the oven into a power point.
Ensure the oven door is closed.
1
