6
SETTING THE CLOCK
BEFORE OPERATION
Plug in the oven.
1.
The oven display will flash the message
shown opposite.
2.
Press the
STOP/CLEAR
key.
3.
Set the clock, refer to the next section.
Use the STOP/CLEAR key to:
1.
Erase a mistake during programming.
2.
Stop the oven temporarily during
cooking.
3.
Cancel a programme during cooking,
press twice.
STOP/
CLEAR
STOP/CLEAR
key
After plugging in the oven, if you haven’t pressed
STOP/CLEAR
, do so now to clear the display.
Your oven is fitted with a 12-hour clock. To set the time of day, follow the guidelines given in the example below:
EXAMPLE:
To set the time of day, 12:35.
7.
Press the
AUTO START/ CLOCK
key again to set the clock.
1.
Press the
AUTO START/CLOCK
key once.
Check the display.
5.
Press the
AUTO START/
CLOCK
key again.
6.
Enter the minutes by pressing the
10 MIN
key three times and the
1 MIN
key five times.
2.
Enter the hours, by pressing
the
10 MIN
key once and
the
1 MIN
key twice.
NOTES:
• Once the time of day is set, you need only reset when
the clocks change, if there is a power cut or if you
disconnect the oven from the power socket.
• If the clock is set and cooking is complete, the display
will return to show the correct time of day. If the clock
has not been set, the display will show:
STOP/
CLEAR
x1
AUTO START
CLOCK
x1
10min.
1min.
10min.
1min.
AUTO START
CLOCK
AUTO START
CLOCK
x1
x1
x2
x3
x5
x1
