INSTALLATION
5
BUILDING-IN-KIT.
An installation frame is available which enables the
microwave oven to be integrated within a kitchen unit.
The microwave oven is not designed to be built above
or near a conventional oven.
SHARP recommend the use of the build in kit, EBR-
4500, available from your SHARP dealer. Only the
use of this frame will guarantee the quality and safety
of the oven. When building, follow installation
instructions supplied for A type models carefully.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, do not operate the oven, it must
be replaced with a special power cord, by the
manufacturer or their service agent or a similarly
qualified person.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
• When removing the plug from the socket always
grip the plug, never the cord as this may damage
the power supply cord and the connections inside
the plug.
• This product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in `To replace the
mains plug’ on page 20.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code given in `To replace the mains plug’ on page 20.
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Press the
STOP/CLEAR
key:
The display will show:
To set the clock, see page 6
STIR TURN KG PCS MICRO COOK
STIR TURN KG PCS MICRO COOK
1.
2.
x1
STOP
CLEAR
20cm
Do not use the
oven outdoors.
The minimum
height of free
space necessary
above the top
surface of the
oven is 20cm.
1. R-343M o/M 19/1/2000 9:16 Page 5
Содержание R-343M
Страница 2: ...1 R 343M o M 19 1 2000 9 16 Page B ...