Sharp R-226BS, Руководство по эксплуатации

Страница: 11 / 32

Plug power supply cord into a standard 3-pronged
14 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation. The oven
Each time a pad is touched, a BEEP will sound to
acknowledge the touch.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ 0 : 0 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR pad is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except
the present time), touch the STOP/CLEAR pad once
more. If the oven door is opened during the oven
operation, all information is retained.
If the START pad is touched and the oven does not
operate, check the area between the door and door
seal for obstructions and make sure the door is
closed securely. The oven will not start cooking until
the door is completely closed or the program has
been reset.
1
2
3
4
5
6
7
8
1 9
10
11
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAgE OUTPUT CHART
•
The power-level is set by press the button. The chart shows the display, the power
level and the percentage of power.
O P E R A T I O N P R O C E D U R E
This section includes useful information about oven operation.
P O W E R L E v E L ( D I S P L A Y ) A P P R O x I M AT E P E R C E N TA G E O F P O W E R
P100 100%
P90 90%
P80 80%
P70 70%
P60 60%
P50 50%
P40 40%
P30 30%
P20 20%
P10 10%
P 0 0%
10
will automatically shut off.
AUTO MENU/POWER LEVEL