Sharp QW-S32I472X-EU, Руководство пользователя

Страница: 20 / 27

EN - 16
THE CONTROL PANEL
3 4 5 7
6
1 2
Press the Power On/Off button ( 1 ). The End
Of Programme Indicator (
7
) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button ( 3 ). The Programme Display shows
the time of the programme and the time
during operation.
Additional functions can be selected.
NOTE: Press the Tablet Detergent
button ( 5 ) when combined detergents are
used, including salt and rinse aid.
NOTE: Press the Half Load button
( 6 ) to reduce the duration of the selected
programme, and therefore decrease your
energy and water consumption.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
NOTE: When there is not enough
dishwasher salt, the Salt Lack Warning
Indicator ( 7 ) will illuminate to indicate the
salt chamber needs filling.
NOTE: When there is not enough rinse
aid, the Rinse Aid Lack Warning Indicator
( 7 ) will illuminate indicating the rinse aid
chamber needs filling.
Delaying the Programme
Press the Delay button ( 4 ) to delay the start
time of the selected programme by 1 hour
up to 19 hours. Pressing once delays the
start time by 1 hour, continuing to press the
Delay button will increase the delay time.
The programme can be selected first and
the delay time after, or vice versa. Press
the Delay button to change or cancel the
delayed start.
Changing a Programme
Follow the steps below if you would like to
change the programme while in operation.
=
Open the door and select a new
program using the Programme
Selection button.
After closing the door , the newly
selected programme will resume the
course of the old programme.
NOTE: Open the door slightly at first to
avoid water spillage if you wish to stop the
wash programme before it is complete.
Cancelling a Programme
Follow the steps below if you would like to
cancel a programme while in operation.
=
Press and hold the Programme Selection
button for 3 seconds. The End Of Programme
Indicator will flash and the selected programme
number will show on the display.
After closing the door of the machine,
the water discharge process will start
and continue for 30 seconds.When
the programme is cancelled, a buzzer
will sound 5 times and the End Of
Programme Indicator will illuminate.
Open the door of your machine.
The selected programme will
appear on the screen.