EN - 20
7.2.
Cancelling a Program
Follow the steps below if you would like
to cancel a program while in operation.
Press and hold the Program Selection button
for 3 seconds. "1" will be shown on the
display.
After closing the door of the machine,
the water discharge process will start
and continue for 30 seconds.When
the program is cancelled, a buzzer
will sound 5 times and the.
Open the door of your
machine. The selected program
will appear on the display.
7.3.
Switching the Machine Off
"00" will be shown on the display when the
selected program is complete. Buzzer will
also sound 5 times. You can then switch your
machine off using the Power On/Off button.
Disconnect the plug and turn off the
water tap.
NOTE:
Do not open the door before the
program is complete.
NOTE:
If the door of the machine is
opened or the power is cut off while a
program is in operation, the program will
continue when the door is closed or the
power returns.
NOTE:
If the power is cut or the
machine door is opened during the drying
process, the program will terminate. Your
machine will now be ready for a new
program selection.
Buzzer Sound Control
To change the buzzer sound level, follow
the below steps:
1.
Open the door and press Program (2)
and Delay (4) buttons simultaneously for 3
seconds.
2.
When sound setting is recognized,
buzzer gives a long sound and machine will
display last set level, from “S0” to “S3”.
3. To decrease sound level press
Program
button (2). To increase sound level, press
Delay button (4).
4. To save the selected sound level, turn off
the machine.
’’S0’’ level means all voices are off. Factory
setting is “S3”.
Save Power Mode
To activate or deactivate save power mode,
follow the below steps:
1. Open the door and press Delay (4) and
Half Load (5) buttons simultaneously for 3
seconds.
2. After 3 seconds, the machine will display
last Setting, “IL1” or “IL0”.
3. When Save Power Mode is activated,
“IL1” will be displayed. On this mode,
interior lights will turn off 4 minutes after the
door is opened, and the machine will turn
off after 15 minutes of no activity in order to
save energy.
4. When Save Power Mode is deactivated
“IL0” will be displayed. If Save Power Mode
is deactive, interior lights will be on as long
as the door is open, and the machine will
always be on unless it is turned off by user.
5. To save the selected setting, turn off the
machine.
In factory setting, Save Power Mode is
active.
Infoled 2.1
LED Indicator
State of the Machine
Red, continuous
The machine is running a
program.
Red, flashing
A program is cancelled.
Red, flashing
rapidly
The machine has a fault. Refer
to section
"Automatic fault
warnings and what to do".
Green, continuous
A program is finished.
