EN - 1
8
cancel the delay, “3-2-1".
NOTE:
Press and hold the Delay
touch button to change the delayed start
time faster. The rate of change in time is
proportional to the how long the button is
pressed and held for. When the Delay Start
touch button is pressed for a long period of
time, the counter will stop at “h:00”.
7.1 Changing a Programme
Follow the steps below to change a
programme while in operation.
1.
Open the door and press the
Programme touch button (
2
) to select a
new programme. If the door is opened
during operation, the time remaining of
the selected programme will show on
the display (
3
).
2.
After closing the door, the newly
selected programme will resume the
course of the old programme.
NOTE:
Open the door slightly at first
to stop a wash programme before it is
complete in order to avoid water spillage.
7.2. Cancelling a Programme
Follow the step below to cancel a
programme while in operation or while in
standby mode.
3.
After the door is closed, the water
discharge process will start and
continue for 30 seconds. When a
programme is cancelled, a buzzer will
sound 5 times.
NOTE:
When the door is opened after
the selected wash programme is complete,
a buzzer will sound and ‘0’ will show on the
display (
3
).
(1)
(2)
(4)
(5)
(6)
(7)
(8)
(9)
(3)
(11)
(10)
7.3. Switching the Machine Off
When the selected wash programme is
complete, a buzzer will sound 5 times. You
can then switch your machine off using the
Power On/Off touch button (
1
).
NOTE:
Do not open the door before a
programme is complete.
NOTE:
Leave the door of your
machine slightly open at the end of a wash
programme to speed up drying.
NOTE:
If the door of the machine
is opened or the power is cut during
operation, the programme will restart when
the door is closed or the power returns.
Programme and Option Compatibility
OPTIONS PROGRAMS
Delayed Start
Half load (3 modes)
Tablet
Extra Fast
Extra Silent
QuickW
ash 14'
-
-
Quick 30'
-
-
Eco
-
-
Dual Pro W
ash
Express
-
-
Hygiene
-
-
Auto Delicate
-
-
Auto Intensive
-
-
“-“ Function cannot be selected
“ ” function can be selected.