QT-CD700W
27
Yes
N o
N o
Yes
N o
Yes
N o
Yes
TDOUT
No
Yes
TEO
TEN
No
Yes
No
Yes
TLCRFM
RFRPRFM
Yes
* Spindle motor
IC101A when the function is changed to "PLAY" from
"STOP"?
Is above wave obtained between pins 1 and 2 of IC601?
Is above wave obtained between pins 5 and 6 of CN2?
CN2 connection failure of optical pickup failure.
* Track search failure
Does the slide motor run in UP/DOWN state when the CD
TEST MODE is set?
Is the following wave output to the pin 21 (TDOUT) of IC101A
during track search in normal playback?
Is the following wave output to the pin 60 (TEO) of IC101A
during track search in normal playback?
Is the above wave output to the pins 61(TEN) and 60(TEO) of
IC101A during track search in normal playback?
Is the following wave output to the pin 57 (RFRPRFM) and 58
(TLCRFM) of IC101A2 during track search in normal
playback?
Check the PWB pattern between pin 60 (TEO) of IC101A and
pins 61 (TEN) and 60 (TEO) of IC101A. If OK. IC101A failure.
IC101Afailure.
Check as stated in item "SLIDE MOTOR OPERATION FAILURE".
Check the PWB pattern between pin 24 (CLVOUT) of IC101A and
pins 5 and 6 of IC601. If OK. IC601 is faulty.
Check the procedure in "HE ERROR".
If OK. IC101A is faulty.
Check the PWB pattern between CN2 and IC601.
Check the PWB pattern between pin 21 (TDOUT) of IC101A and
pin 15 of IC601.
Check the PWB pattern between pins 26 and 27 of IC601 and
Optical pickup.
If OK. Optical pickup failure.
Check the PWB pattern between pin 63 (RFI) and pin 64 (EQO).
If ok. IC101A failure.
Normal.