QT-90W
– 2 –
NAMES OF PARTS
HOW TO SET THE POINT "0" ON TUNER DIAL MEMORY
Figure 2
1. Remove the front cabinet and main PWB. (Refer to page 3,
of disassembly section.)
2. Turn the gear dial in the arrowed direction until it stops so
that the " " mark comes to the front of main PWB.
3. When the tuning knob is set at 2, adjust it from above so that
its "0" point rib comes to the right of "0" point rib of the dial
drum when you face the unit.
4. Check the tuning display label by turning the tuning knob.
The frequency band will be FM 88 - 108 MHz when the dial
is turned counter-clockwise.
5. Reassemble the front cabinet.
1
2
3 4 5 6
7 8 9 10
11 12 13 14 15 16 17
18 19
22
23
21
20
0
1. Function/Beat Cancel Switch
0
2. Cassette Compartment
0
3. Record Button
0
4. Play Button
0
5. Rewind Button
0
6. Fast Forward Button
0
7. Stop/Eject Button
0
8. Pause Button
0
9. Volume Control
10. Band Selector
11. Extra Bass Control
12. Graphic Equalizer Controls
13. Built-in Microphone
14. Sound Level Meter
15. Surround Button
16. Fine Tuning Control
17. Tuning Control
18. Mixing Microphone Socket
19. Line Input Sockets
20. AC Voltage Selector
21. AC Input Socket
22. Battery Compartment
23. Headphone Socket
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
QACCA0004AW00
QACCB0012AW00
QACCE0007AW00
QPLGA0004AWZZ
QPLGA0003AWZZ
AC POWER SUPPLY CORD AND AC PLUG ADAPTOR
QACCL0002AW00/QACCL0008AW00
Mark “ ”
Tuning Knob
Tuning Knob
“0” Point of Tuning Display
Tuning Knob “0” Point Rib
Tuning Knob
“ 0 ” Point Rib
Top Side
Main PWB
Dial Drum
Gear Dial
Main PWB
Front Side
Mark “ ”
Dial Drum “0” Point Rib
Dial Drum
Tuning Knob
Bracket
Dial Drum “0”
Point Rib
Front Side
2
3
