Sharp QT-80W, Руководство по эксплуатации

Страница: 7 / 29

E-6
Recording to a Cassette Tape
Before recording:
●
When recording important selections, make
a preliminary test to ensure that the desired
material is properly recorded.
●
SHARP is not liable for damage or loss of
your recording arising from malfunction of
this unit.
■
Recording from the radio
1
Set the FUNCTION switch to RADIO.
2
Set the BAND SELECTOR switch to FM,
MW, SW1 or SW2.
3
Tune in to the station to be recorded.
4
Load a blank cassette into the cassette
compartment with the side to be record-
ed on facing up.
5
Press the PAUSE
6 6 6 6 6
button.
6
Press the RECORD
●
button.
7
Press the PAUSE
6 6 6 6 6
button again to be-
gin recording.
To stop recording:
Press the STOP/EJECT
■
7
button.
Beat cancel switch:
If a whistling noise occurs when recording from
an MW, SW1 or SW2 station, set the BEAT
CANCEL switch to A or B, whichever gives the
best reception.
●
The ALC (Automatic Record Level Control)
circuit automatically controls the level of the
input signal used for recording.
●
The VOLUME and X-BASS controls may be
adjusted with no effect on the recorded sig-
nal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes cannot be used for
recording.
■
Recording from the built-in
microphone
1
Set the FUNCTION switch to TAPE.
2
Load a cassette into the cassette com-
partment.
3
Press the PAUSE
6 6 6 6 6
button.
4
Press the RECORD
●
button.
5
Press the PAUSE
6 6
6 6
6
button again to be-
gin recording.
Notes:
●
Monitoring of the recording is not possible.
●
Recording from the built-in microphone is
not in stereo.
■
Erasing a recorded tape
1
Set the FUNCTION switch to LIME.
●
Do not connect anything to the LINE IN and
MIXING MIC sockets.
2
Load a tape into the cassette compart-
ment with the side to be erased facing up.
3
Press the RECORD
●
button.
01-E1-E9-QT-80W(EX) 2001.3.2, 8:46 AM 7