Sharp PN-R426 Скачать руководство пользователя страница 16

Страница: 16 / 66

Preparing the Remote Control Unit

[PN-R556/PN-R496/PN-R426]

For the monitor in landscape orientation

For the monitor in portrait orientation

20º

10º

20º

10º10º

10º

9.8 feet (3m)

Remote control

sensor

9.8 feet

(3m)

Remote control

sensor

9.8 feet

(3m)

9.8 feet

(3m)

Remote control sensor out

Point the remote control toward the remote control sensor on the front of the monitor.

[PN-R706/PN-R606]

For the monitor in landscape orientation

For the monitor in portrait orientation

30º

16.4 feet (5m)

10º

16.4 feet

(5m)

10º

Remote control

sensor

Remote control sensor

16.4 feet

(5m)

10º10º

16.4 feet

(5m)

10º

[PN-R556/PN-R496/PN-R426]

For the monitor in landscape orientation

For the monitor in portrait orientation

30º

10º

10º10º

10º

16.4 feet (5m)

Remote control

sensor

16.4 feet

(5m)

16.4 feet

(5m)

Remote control

sensor

16.4 feet

(5m)

TIPS

• Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

• Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

• The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

• Objects between the remote control unit and the remote control sensor may prevent proper operation.

• Replace the batteries when they run low as this may shorten the remote control’s operation range.

• If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

• Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

Содержание PN-R426



































































Результаты поиска

Содержание PN-R426

Отзывы:

Бренды по названию

Популярные бренды

Sharp PN-R426, Руководство по эксплуатации

Результаты поиска

Содержание PN-R426

Отзывы:

Бренды по названию

Популярные бренды