Sharp PN-HW431, Руководство по эксплуатации

Страница: 34 / 42

34
E
RS-232C command table
How to read the command table
Command: Command field (See page 33.)
Direction: W When the “Parameter” is set in the parameter field (see page 33), the command functions as described
under “Control/Response Contents”.
R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+”
(repeater control) in the parameter field. (See page 33.)
Parameter: Parameter field (See page 33.)
Reply: Response (Returned value)
* : When POWER SAVE MODE is set to OFF:
“●/○” : Indicates a command which can be used in standby mode or when the power is on.
“–” : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
When POWER SAVE MODE is set to ON:
“●” : Indicates a command which can be used in standby mode or when the power is on.
“○/–” : Indicates a command which can be used when the power is on. Cannot be used in standby mode.
Power control/Input mode selection
Function Command Direction Parameter Reply Control/Response contents *
POWER CONTROL POWR W 0 Switches to standby mode.
●
1 Returns from standby mode.
R 0 Standby mode
1 Normal mode
2 Input signal waiting mode
INPUT MODE SELECTION INPS W 0 Toggle change for input mode.
-
2 D-SUB
10 HDMI1
11 USB
13 HDMI2
18 HDMI3
PICTURE menu
Function Command Direction Parameter Reply Control/Response contents *
BRIGHT VLMP WR 0-50 0-50
-
SIZE (Screen size selection) WIDE WR 1-4 1-4 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM
COLOR MODE BMOD WR 0 0 STD
2 2 VIVID
3 3 sRGB
4 4 HIGH ILLUMINANCE
WHITE BALANCE WHBL WR 0-2 0-2 0:THRU, 1:PRESET, 2:USER
R-CONTRAST CRTR WR 0-255 0-255 “ERR” when WHBL is not set to 2.
G-CONTRAST CRTG WR 0-255 0-255
B-CONTRAST CRTB WR 0-255 0-255
SETUP menu
Function Command Direction Parameter Reply Control/Response contents *
Telnet User name USER WR XXXXXXXX XXXXXXXX 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field can be left blank, but spaces cannot be entered.)
-
Telnet Password PASS WR XXXXXXXX XXXXXXXX 8 characters or less; half-width alphanumeric characters, “-”, and “_”.
(The field can be left blank, but spaces cannot be entered.)
THERMAL SENSOR SETTING STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT
Model INF1 R Value
Serial no. SRNO R Value
AUTO ASNC W 1 Adjust CLOCK/PHASE/H-POS/V-POS automatically in D-SUB
ALL RESET RSET W 0
Controlling the Monitor with a computer (RS-232C)