Sharp PN-E802 Professional страница 47 Скачать руководство пользователя

Страница: 47 / 56

■ MAIL (RECIPIENT)

This screen allows you to specify the recipients of the e-mail

sent periodically or when the monitor has an error.

RECIPIENT E-MAIL ADDRESSES

Specify the e-mail addresses to send error notification e-mail

to.

CONDITION

Specify the conditions to send mails.

When you check PERIODICAL, specify the date and time to

send the mails in the PERIODICAL setting.

CONFIRMATION

Sends test e-mail.

This allows you to confirm that the e-mail settings are

configured properly.

Attach the log file to a TEMPERATURE/HARDWARE error

e-mail.

When this option is checked, a log is added to the mail which

notifies a temperature or status error.

TIPS

• The RECIPIENT E-MAIL ADDRESSES can be up to 64

alphanumeric characters or symbols.

Controlling the Monitor with a PC (LAN)

■ MAIL (PERIODICAL)

When PERIODICAL for CONDITION of MAIL (RECIPIENT) is

checked, set the date and time to send the mail.

DAY OF THE WEEK

Specify the day of the week to send the periodical mails.

TIME

Specify the time of the day to send the periodical mails.

Caution

• Do not turn off the main power when you set to send the

periodical mails.

• Specify the correct date and time. (See page 22.)

If the date and time settings are incorrect, the periodical

mail is not sent properly.

• Regularly confirm that the specified date and time is

correct.

• When LOW POWER is selected for STANDBY MODE,

periodical mails will not be sent in standby mode.

Содержание PN-E802 Professional

























































Результаты поиска

Содержание PN-E802 Professional

Отзывы:

Похожие инструкции для PN-E802 Professional

Бренды по названию

Популярные бренды

Sharp PN-E802 Professional, Руководство по эксплуатации

Результаты поиска

Содержание PN-E802 Professional

Отзывы:

Похожие инструкции для PN-E802 Professional

Бренды по названию

Популярные бренды