Sharp Plasmacluster FU-W53J Скачать руководство пользователя страница 12

Страница: 12 / 20

To prevent dirt or stains on the main unit, clean as often as necessary. If stains are allowed to

remain, they may become hard to clean.

Wipe with a dry, soft cloth

For stubborn stains or dirt, use a soft cloth dampened with warm water.

Do not use volatile fluids

Benzine, paint thinner, polishing powder, etc., may damage the surface.

Do not use detergents

Detergent ingredients may damage the unit.

Keep the unit away from water

E-10

CARE AND MAINTENANCE

MAIN UNIT

SENSORS

(DUST SENSOR, ODOUR SENSOR)

Sensor Cover

Hole of Odour Sensor

Clean the top surface of the Washable Active

Carbon Filter lightly with a vacuum cleaner.

Remove dust from the surface of the hole of the

sensors using a vacuum cleaner.

SENSOR FILTER CARE

Care Cycle

1 month

Care Cycle

2 months

Care Cycle

2 months

To maintain optimum performance of this air purifier, please clean the unit including the sen-

sor and filters periodically. When cleaning the unit, be sure to unplug the power cord, and nev-

er handle the plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

FILTER RESET INDICATOR LIGHT

The Filter RESET Indicator Light will illuminate as a reminder to perform mainte-

nance of the Filters and Sensors.The Indicator Light will turn on after approximately

720 hours of use.

After performing maintenance, reset the Filter Reset Indicator. Plug the unit in, turn

power ON, and press the Plasmacluster Ion ON/OFF Button for 3 seconds. The Fil-

ter Indicator Light will go off. Even if the Filter Indicator Light is already off, the Plas-

macluster Ion ON/OFF Button should be pressed to reset the maintenance timer.

FILTER

Washable Active

Carbon Filter

Hole of Dust Sensor

Detach the sensor filter and

tap it lightly with your hand to

remove the dust.

If it is very dirty, wash it with

water and then allow it to dry

thoroughly.

Sensor Cover

Sensor Filter

It does not have a

front and a back.

FU-W53J.eng.indd 12

09.10.9 9:19:42 AM

Содержание Plasmacluster FU-W53J





















Результаты поиска

Содержание Plasmacluster FU-W53J

Отзывы:

Похожие инструкции для Plasmacluster FU-W53J

Бренды по названию

Популярные бренды

Sharp Plasmacluster FU-W53J, Руководство по эксплуатации

Результаты поиска

Содержание Plasmacluster FU-W53J

Отзывы:

Похожие инструкции для Plasmacluster FU-W53J

Бренды по названию

Популярные бренды