Sharp Plasmacluster AE-X30EJ Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 22

Sharp Plasmacluster AE-X30EJ Скачать руководство пользователя страница 3

1

ENGLISH

Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.

CONTENTS

PRECAUTIONS

WARNINGS FOR USE

1

This model should be installed with a fixed power cord to the meter box.

2

Be careful not to expose your body to the outlet air for prolonged periods. It may affect
your physical condition.

3

When using the air conditioner for infants, children, elderly, bedridden or disabled people
make sure the room temperature is suitable for those in the room.

4

Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of the internal fans.

5

If anything abnormal with the air conditioner (eg burning smell), stop the opertaion
immediately and turn the circuit breaker off.

6

This air conditioner should be installed by a licensed air conditioning contractor in
accordance with AS/NZS 3000:2000 and your electricity suppliers rules.

7

There are local council rules regarding maximum allowable noise levels emitted by air
conditioners, your licensed air conditioning contractor will advise you on the correct
location of your outdoor unit.

8

Use only the manufacture-specified power cord for replacement. Replacement should be
performed by a service centre approved by SHARP.

WARNINGS FOR INSTALLATION / REMOVAL / REPAIR

For your safety, ensure that your new air conditioner is installed by a licensed air
conditioning contractor in accordance with the AUSTRALIAN/NEW ZEALAND WIRING
RULES.

• Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric

shock, water leak, fire etc. Consult a licensed air conditioning contractor for the installation/
removal/repair of the unit.

• PRECAUTIONS ........................................ 1
• ADDITIONAL NOTES ON OPERATION .... 3
• TIPS ON SAVING ENERGY ..................... 3
• PART NAMES ........................................... 4
• USING THE REMOTE CONTROL ........... 6
• BASIC OPERATION ................................. 8
• ADJUSTING THE AIR FLOW DIRECTION ..... 10
• FULL POWER OPERATION .................... 11
• ONE-HOUR OFF TIMER .......................... 11

• TIPS ABOUT PLASMACLUSTER OPERATION ...... 12
• PLASMACLUSTER OPERATION ................ 13
• SELF CLEAN OPERATION .......................... 13
• TIMER OPERATION ..................................... 14
• AUXILIARY MODE ....................................... 16
• MAINTENANCE ............................................ 16
• BEFORE CALLING FOR SERVICE ............. 18
• SPECIFICATIONS ........................................ 19

AY-XP30EJ_6.5

03.11.25, 2:51 PM

3

«
1
2
3
4
5
...
»

Содержание Plasmacluster AE-X30EJ























Отзывы:

Нет отзывов