Quick Start Reference Sheet
Sharp PG-M20x
Revision A
DR-SHP20 – 9/17/03
SP Controls reserves the right to modify specifications without notice at any time.
NOTE:
This one-page document is intended
only as a quick reference for installation
– please read
the SP Controls Application Note for a complete description of this projector driver prior to installation.
I. Driver Features
1. Input Selection Mapping
Selection 1:
DVI
Selection 2:
S-VIDEO
Selection 3:
VIDEO
Selection 4:
VIDEO
2. Hidden Function Mapping (Default Configuration)
Using the ON button as a shift key, press the following buttons to access the specified projector features.
Selection 1:
ENTER
Selection 2:
UNDO
Selection 3:
ADJ LEFT
Selection 4:
ADJ RIGHT
Off:
MENU
Volume Up:
ADJ UP
Volume Down:
ADJ DOWN
3. Other Driver Features
Power Status Feedback Method
Sensor
Control Wiring:
IR-Emitter
II. Wiring Specifications
NOTE: For a wiring diagram, please see the SP Controls Application Note.
1. Infrared Emitter:
Wire the Panel IR/Serial port to a female 1/8" Mini as follows:
IR/SER
to
tip
GND
to
ring
Connect to the included IR Emitter and attach the emitter bud to any projector IR window.
III. Additional Projector Information
There are settings on the Sharp PG-M20x projector that will affect how the SmartPanel will work. In order
to receive the best performance, set the following options to
OFF
in the projectors menu screens.
Press the
MENU
button either using the SmartPanel hidden functions or the Sharp remote control. Then
change the following settings.
1. In the Options menu screen turn Auto Power Off to
OFF
2. In the Options menu screen turn the Power Save to
OFF
3. In the Options menu screen turn the Auto Search to
OFF
