Sharp PG-LW3000 Скачать руководство пользователя

Страница: 27 / 77

Basic

Operation

Turning the Projector On/Off

Turning the Projector On

Note that the connections to external

equipment and power outlet should be

done before performing the operations

written below. (See pages

t o

Press

STANDBY/ON

on the projector

on the remote control.

• The power indicator illuminates green.

• After the lamp indicator illuminates, the projector

is ready to start operation.

•

About the Lamp Indicator

The lamp indicator illuminates to indicate the

status of the lamp.

Green:

The lamp is on.

Blinking in green:

The lamp is warming up.

Red: The lamp is shut down

abnormally or the lamp should be

replaced.

• When switching on the projector, a slight

flickering of the image may be experienced

within the first minute after the lamp has been

illuminated. This is normal operation as the

lamp's control circuitry is stabilising the lamp

output characteristics. It should not be

regarded as faulty operation.

• If the projector is put into Standby mode and

immediately turned on again, the lamp may

take some time to start projection.

• When System Lock is set, the keycode input

box appears. To cancel the keycode setting,

input the keycode that you have already set.

See page

for details.

Note

Turning the Power Off (Putting

the Projector into Standby Mode)

Press

STANDBY/ON

on the projector

STANDBY

on the remote control,

then press that button again while the

confirmation message is displayed, to

put the projector into Standby mode.

• The projector cannot be turned on while cooling.

Info

•

When “Auto Restart” is set to “On”:

If the power cord is unplugged from the outlet

or the breaker switch is turned off when the

projector is on, then the projector

automatically turns on when the power cord

is plugged into the AC outlet or the breaker

switch is turned on. (See page

• English is the factory default language. If you

want to change the onscreen display to

another language, change the language

according to the procedure on page

STANDBY/ON button

Lamp indicator

Power indicator

STANDBY

button

ON button

On-screen display (confirmation message)

Info

•

Direct Power Off function:

You can unplug the power cord from the AC

outlet even if the cooling fan is still running.

Содержание PG-LW3000














































































Результаты поиска

Содержание PG-LW3000

Отзывы:

Похожие инструкции для PG-LW3000

Бренды по названию

Популярные бренды

Sharp PG-LW3000, Руководство по эксплуатации

Результаты поиска

Содержание PG-LW3000

Отзывы:

Похожие инструкции для PG-LW3000

Бренды по названию

Популярные бренды