Sharp PG-LW3000, Руководство по эксплуатации

Страница: 52 / 77

50
Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)
Menu operation
n
Page 40
Q PRJ­ADJ1
SEL./ADJ. ENTER END
Auto Power Off On
Auto Restart On
Speaker On
Off Keylock
System Lock
Fan Mode Normal
Disable
Auto Sync On
Pict. SCR PRJ-ADJ1 SIG PRJ2
1
2
3
4
5
7
6
1
Auto Sync (Auto Sync
Adjustment)
Selectable
items
Description
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not
automatically performed.
• Auto Sync adjustment is also performed by
pressing AUTO SYNC .
• The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page 45 .)
Note
2
Auto Power Off Function
Selectable
items
Description
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter Standby mode.
Off The Auto Power Off function will be
disabled.
• When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
Standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.
Note
Q PRJ-ADJ2
Pict. SCR PRJ-ADJ2 Net. SIG
SEL./ADJ. ENTER END
COMPUTER2 Select
DLP
®
Link
TM
Off
Monitor Output
FUNCTION Button Input Search
STANDBY Mode Quick Start
STANDBY Audio Out On
DLP
®
Link
TM
Invert
Quick Start Menu On
PRJ1
All Reset
8
9
0
Lamp Timer(Life) [ 0] h [ 0] min (100%)
3
Auto Restart Function
Selectable
items
Description
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
4
Speaker Setting
Selectable
items
Description
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.
5
Fan Mode Setting
This function changes the fan rotation speed.
Selectable
items
Description
Normal Suitable for normal environments.
High Set when using the projector at
altitudes of approximately 1,500 meters
(4,900 feet) or more.
When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.